Does this occur on live or only recorded video? if only on recorded toggle "also bvr" in the video tab.Hi I just notice on the camera at the bottom there is a thin line which looks pixlated.. on Blueiris 5..
Now the question is.. On the camera itself looking from webpage its fine.. It is blueiris seems to be having that..
What can it be Bug ???View attachment 43270
Vpp is part of the intel HA but it is not suitable for some camera feeds or processing lots of video. You are best simply leaving it off in this case. There is a release note that explains vpp.I just did the intel on one camera nad it seems to go away on that camera.. Does that mean I use only Intel and not video post proc ?
Ah interesting.. So rite now I am running about 14 camera feed all are 15 fps 1080p..Vpp is part of the intel HA but it is not suitable for some camera feeds or processing lots of video. You are best simply leaving it off in this case. There is a release note that explains vpp.
Its reaching the limit of vpp (its limited after a specific bitrate total). VPP can actually make things worse under your load. Simply disable vpp.Ah interesting.. So rite now I am running about 14 camera feed all are 15 fps 1080p..
I have a plan of adding 7-10 more cameras.. So is that almost already reaching the limitation of the 4770k ?
Also I did turn the intell vpp off and back on I mean switch back and fourth and it seems to be fine now..
Not sure what is going on.. But now it is even working with the VPP
Thank you for that information.. I am going to add more cameras and see how this thing handles it..Its reaching the limit of vpp (its limited after a specific bitrate total). VPP can actually make things worse under your load. Simply disable vpp.
14 1080p cams at 15fps is nothing for the 4770k. The additional cams will depend on resolution and fps.
I have the same problem in one of two camera setups from one physical camera. It is in live view, regardless of the window size and it records with the pixelated line. I'm using Intel hardware acceleration.Hi I just notice on the camera at the bottom there is a thin line which looks pixlated.. on Blueiris 5..
Now the question is.. On the camera itself looking from webpage its fine.. It is blueiris seems to be having that..
What can it be Bug ???View attachment 43270
Have you tried the solutions in this thread?I have the same problem in one of two camera setups from one physical camera. It is in live view, regardless of the window size and it records with the pixelated line. I'm using Intel hardware acceleration.
I have now that I'm back on my PC. Here's what I found:Have you tried the solutions in this thread?