Light fixture causing washout (photo)

FiddlerKY

n3wb
Joined
Mar 24, 2018
Messages
2
Reaction score
0
Hi all, other than changing the location, are there tricks or thoughts on how to reduce the amount of washout a door light causes on my video stream? I’m likely going to move the camera to above or just in front of the light, but I lose my door view which I don’t like. Would it be better if I move it back further? I have attached a photo of what I’m seeing. This is the side of my house.

EDIT: This is an LNB8005 Lorex camera from the Costco set (LNR6826K).

Thanks!

80D24BE2-D396-482E-B328-67D0A32C0B22.jpeg
 
Last edited:

Parley

Known around here
Joined
Dec 19, 2015
Messages
5,603
Reaction score
15,935
Location
Cypress, California
Do you have a daytime photo of the light itself? I was wondering if you extend the light bulb further up into the lamp unit. I did that with mine by buying a socket extension. Another thought would be to block off some of the light on the camera side.
 

fenderman

Staff member
Joined
Mar 9, 2014
Messages
36,897
Reaction score
21,250
put a dimmer on the light or use a lower output bulb.
 

Camit

Pulling my weight
Joined
Feb 7, 2017
Messages
412
Reaction score
122
This is why you always test your location your mounting,before you mount the camera. If it was me I would just move the camera, which I know you said you didn’t want to do but the placement is horrible.you could try WDR if you have it but prob won’t do much use setting 5. Or just turn off the light, no other way around it.
 

mat200

IPCT Contributor
Joined
Jan 17, 2017
Messages
13,649
Reaction score
22,741
If not wanting to move the light, nor change out the camera, nor move the camera then:

Perhaps shielding the light from the camera a bit?
 
Joined
Oct 16, 2018
Messages
1,659
Reaction score
5,464
Location
Florida, USA
Love the BGE.

As for the light, can you adjust the camera view just a bit to lessen the amount of light hitting the camera? Do you want to record the side of your house (brick)? Is there an opening I can’t see?

87C769E5-7482-46CC-8185-A8347906057A.png

24B97FD6-44BB-4AFA-88A0-399797255B00.png

914B2A7A-D156-4C8E-B640-8DDEA192B72D.jpeg
 
Last edited:

Parley

Known around here
Joined
Dec 19, 2015
Messages
5,603
Reaction score
15,935
Location
Cypress, California
Here is my front porch light. I was able to raise the light bulb in the socket about an inch with an extender and that did the trick. The light bulb is a 40 watt equivalent LED.

Front Porch Light.jpg
 

Parley

Known around here
Joined
Dec 19, 2015
Messages
5,603
Reaction score
15,935
Location
Cypress, California
If not wanting to move the light, nor change out the camera, nor move the camera then:

Perhaps shielding the light from the camera a bit?
This ^^^^^. Adjust the camera to the light so that it does not shine into the camera. It does not appear that you have to move it very much.
 
Last edited:

Old Timer

Known around here
Joined
Jul 20, 2018
Messages
1,352
Reaction score
2,945
Location
I'm ok
I placed a piece of aluminized tape inside my porch light lens between the light bulb and the camera. It gives a shadow towards the camera and allows the camera to work well at night.
 
Top