Milestone with Wyze cam V2

Are you referring to the camera login? If so, no I did not enter any login credentials. Is there a password needed as well?
 
I can’t recall if it needed it for authentication but try “root” and “ismart12” unless you changed the default password
 
Tried that and still no luck. I ran across another thread that said the username is dafang and that did not work as well, I have not changed the default password.
 
Both dafang and root will work for the user name but I believe that authentication is off by default.
 
I did a fresh install of the newest version of Milestone and gave the newer OEM wyze cam rtsp firmware a try. I was able to get it working with some tweaking of the universal driver settings.

I set the uri option on rtsp play to NO for this camera. It seems to be working.

c87906512d3b5a14c0d4013e53dc2435.jpg
 
Yes, it is the universal driver.
The password and user name are set in the wyze cam, when you are configuring the rtsp feed.

The uri is live
 
Just chiming in on this, i have 8 wyze cams on milestone 2019 system at work(50 total cameras) Here is what has worked for me: using rtsp firmware from wyze (use reddit to find firmware). The wifi signal strength needs to be strong or milestone will give an error. Even if wyze app is able to see the camera, milestone won’t. Use the universal 16 driver cam 1, just disable the others after its added. Make sure feed is /live and RTSP milti stream. After setting that up, go back to hardware and edit hardware, save. It has worked flawless for the last several cameras.

no audio or speaker being used

I suspect the wyze bridge will work better, it works great in blue iris.
 
You must log in or register to reply here.
Top Bottom