Chokolinho
Getting the hang of it
I ordered the camera yesterday. I'll post a few photos of the picture quality as soon as it's mounted. Maybe someone would like to buy the camera too.
Are you using an SD card installed in the camera or a NVR?It is possible to save cctv footage and/or snapshots to a network share (e.g. smb) and view them via the camera's web interface?
When I try, the camera doesn't show any saved footage/snapshots.
It is possible to save cctv footage and/or snapshots to a network share (e.g. smb) and view them via the camera's web interface?
When I try, the camera doesn't show any saved footage/snapshots.
Make sure you have MD turned off.How do I disable SMD (smart motion detection) but still have IVS (tripwire and intrusion area). The moment i enable IVS snapshots, it performs both SMD on the frame (i get so many false positives).
View attachment 209755
View attachment 209756
According to those pictures you have motion detection off. Just setup your trip wire for IVS.How do I disable SMD (smart motion detection) but still have IVS (tripwire and intrusion area). The moment i enable IVS snapshots, it performs both SMD on the frame (i get so many false positives).
View attachment 209755
View attachment 209756
I believe that is the version with ISP installed on the camera? Hopefully someone can get us a review without the ISP firmware installed!This batch came with a different firmware version then the previous batch. This firmware version is not on Empiretech website (and is newer).
(new batch) V3.140.0000000.7.R, Build Date: 2024-10-18
( old batch) V3.140.0000000.3.R, Build Date: 2024-09-05
Recording to network share does not work on this version (no matter how many factory resets and checking over settings).
What firmware version are people running?
Can I try the older version firmware on Empiretech website on this new batch of camera's?
This batch came with a different firmware version then the previous batch. This firmware version is not on Empiretech website (and is newer).
(new batch) V3.140.0000000.7.R, Build Date: 2024-10-18
( old batch) V3.140.0000000.3.R, Build Date: 2024-09-05
Recording to network share does not work on this version (no matter how many factory resets and checking over settings).
What firmware version are people running?
Can I try the older version firmware on Empiretech website on this new batch of camera's?
Thanks.
Was firmware v4 to v6 ever publicly released?
Newbie here who has spent many hours to go through reviews and forums. So much thankful to everyone contributing to this great platform.
So, I am leaned towards this TIOC-PRO series and would love if someone experienced here can put some images and day and night time video recordings with AI-ISP version.
Also, would love your advise on combination of products I can go with. Here is my situation.
House in an urban setting with street light in the front. Street is full of houses next to each other with around 8ft passage between two houses each side. Both sides stay dark in the night and have ground level windows on one side and a side entrance on the other side. The backyard is about 40ft wide and 30ft long and shares fences with 5 other neighbors. No direct source of light in the backyard but looks little illuminated by the urban lights as a major road passes from 200 meters away.
I was thinking to get 10 of TIOC Pros to cover the maximum area.
Can you please guide me in choosing the best bang for the buck models? Should I go with all 4MP models, or since I have some light in the front, going with 6 or 8 MP will provide a better solution? better Night vision and storage cost is the most important criteria for me.
PS: I read the famous debate about night time performance of 4mp vs 8mp, and I know 4mp always out-performs 8mp in darker situations. But with the new Dahua WizColor, is this still the case? or 8mp has advanced enough to negate the performance lacking compared to the 4MPs?
When people or vehicles are detected, the camera switches to color and then activates the lights.Can this cam be setup so it starts in IR at night and then, when motion is detected, it transitions to color/white light?