Hey,
I have hikvision NVR 8ch Ds7608NI-K2 also installed DS-7604NI-K1/4P
cameras I'm using are Prolux 8mp PXC-62418G-LED. unable to use motion detection on them. Do you think these are not compatible with hikvision nvrs ? Khal
On the assumption that they are connected to the NVR using the ONVIF protocol, it depends on whether the cameras issue ONVIF motion event notifications.
You can check if motion event notifications are issued using ONVIF Device Manager
Download ODM for free. Device Manager for ONVIF-based Network video devices. ODM is a ONVIF protocol implementation of Network Video Client (NVC) to manage Network Video Transmitters (NVT), Network Video Storage (NVS) and Network Video Analytics (NVA) devices. Implements Discovery, Device...
sourceforge.net
ODM will find ONVIF devices on the same LAN automatically if their IP address is in the same range as that of the PC it's running on.
Example :
On the assumption that they are connected to the NVR using the ONVIF protocol, it depends on whether the cameras issue ONVIF motion event notifications.
You can check if motion event notifications are issued using ONVIF Device Manager
Download ODM for free. Device Manager for ONVIF-based Network video devices. ODM is a ONVIF protocol implementation of Network Video Client (NVC) to manage Network Video Transmitters (NVT), Network Video Storage (NVS) and Network Video Analytics (NVA) devices. Implements Discovery, Device...
sourceforge.net
ODM will find ONVIF devices on the same LAN automatically if their IP address is in the same range as that of the PC it's running on.
Example :
Many thanks for prompt advice, forgot to mention that it is set at hikvision plug and play protocol however I did try to change it to onvif doing the same recording on continuous but not on event.
sourceforge.net
www.ipcamtalk.com
