Objective:
Profile 1: 24/7, 1)record continuously to hard drive 2)snapshot 1 minute to hard drive 3)upload to FTP every 1 minute
Profile 2: afterhour, active from 8pm to 8am everyday, alert with motion detected, then upload to FTP every 1 minute after the motion is detected.
1. so I followed your instruction, set up two profiles in global schedule and drew appropriate time frame. One is called "24/7" and the other is "afterhour"
2. In record tab, I set up the camera to continuous record for both profiles. However, I didn't set "create jpeg snapshot" every 1 minute as I had done in the past. Now I'm NOT getting 1 minute snap shot recorded to my hard drive. Am I supposed to set the snapshot option as well for 24/7 profile, but not for "afterhour".
3. In Motion tab, I enabled motion sensor for both profiles. I don't understand why I need enable it for continuous recording profile, 24/7.
4. In Alert tab, I set Never for 24/7 and fire when the camera is triggered for Afterhour.
http://snag.gy/60M8d.jpg
5. In Posting Tab, I followed what you described. See here,
http://snag.gy/o79lz.jpg
The problems,
1. for profile 24/7, I don't see the snapshot being recorded on the hard drive as before. I assume I need to select the option as well.
2 The problem remains with motion detection. It still doesn't detect motion or trigger an alert
3. On the ftp site, I notice the image is updated. What I'd like to do, is to keep the uploaded images in chronological order, not to be overridden and replaced as it is now.