i need some advice or help please, i have tried a few suggestions and setups and i still have issues.
I have 5 cameras, all foscam, 1 wired and 4 ethernet: 3 9821p, 1 8904w and 1 8904p.
In a desktop running BI v4: Specs Asus-AMD phantom X4 quadcore 9600, 4gb ddr2 ram, win7 64bit., OS in a SSD and 1TB for video storage.
network: 50mbps, nighthawk dd-wrt kong build
Issues:
All were working OK when they were first setup for about a week. Now, the picture freezes, upon motion, the videos/alarms recorded are choppy, and they loose connectivity pretty regular. Also the controlling of the P/T is very choppy to say the least via the BI app or in the desktop.
all cameras were setup at 30fps all around in their settings and in BI settings(unticked automatically adjust).
tried changing the buffer to 10mb then 15mb in BI but did not fix my issues.
tried clicking the AUTOMATICALLY adjust ON and nothing.
tried changing the frame rate to 15 in BI and in the cams settings and nothing.
BI is updated, all cams firmware is up to date too.
any help?
I also have a dell laptop intel i5 2.3ghz, 6gb ddr3 ram, win7 64bit, woud swapping this with my desktop to run BI could fix my issue?
please, i am willing to try anything at this point.
I have 5 cameras, all foscam, 1 wired and 4 ethernet: 3 9821p, 1 8904w and 1 8904p.
In a desktop running BI v4: Specs Asus-AMD phantom X4 quadcore 9600, 4gb ddr2 ram, win7 64bit., OS in a SSD and 1TB for video storage.
network: 50mbps, nighthawk dd-wrt kong build
Issues:
All were working OK when they were first setup for about a week. Now, the picture freezes, upon motion, the videos/alarms recorded are choppy, and they loose connectivity pretty regular. Also the controlling of the P/T is very choppy to say the least via the BI app or in the desktop.
all cameras were setup at 30fps all around in their settings and in BI settings(unticked automatically adjust).
tried changing the buffer to 10mb then 15mb in BI but did not fix my issues.
tried clicking the AUTOMATICALLY adjust ON and nothing.
tried changing the frame rate to 15 in BI and in the cams settings and nothing.
BI is updated, all cams firmware is up to date too.
any help?
I also have a dell laptop intel i5 2.3ghz, 6gb ddr3 ram, win7 64bit, woud swapping this with my desktop to run BI could fix my issue?
please, i am willing to try anything at this point.