tangent
IPCT Contributor
- Joined
- May 12, 2016
- Messages
- 4,450
- Reaction score
- 3,703
I'd use washers between the wood and the mount, probably not between the tree and block of wood. Between the tree and block of wood I'd try to shape the block of wood (chisel, rasp, belt sander...) I suppose you could use some composite shims if needed.Great ideas!!! I'll get the wood as level as I can with wedges and washers and a level. Then mount the camera onto the wood secondarily. I was trying to get the entire contraption level while I was up there on the top of a 15ft ladder and the things is heavy. I got it 90% but when you swivel horizontally with a long lens it dips down :/