Network IP Cameras

m1955ike

n3wb
Jan 29, 2017
4
0
any way to make a hikvision nvr pick up network ip cameras via its lan port
 
any way to make a hikvision nvr pick up network ip cameras via its lan port
Sure, just ensure the camera IP addresses are in the same range as the IP address of the (unspecified) NVR LAN port, and add them manually via the web GUI, or if it's something like a 7608NI-E2/8P pick an NVR channel and 'Modify' it to apply the camera IP address.
And if the (unspecified) cameras are Hikvision, use SADP to find and set the IP address.
And if not Hikvision cameras - choose 'ONVIF' as the connection protocol.
 
I'm in a bind I have 6 cameras that need recording in a wired network but NVR has only 4 Poe ports & a lan port, 3 could direct connect via Poe ports but other 3 are via a switch
 
No, NVR will only do whats its configured to do and in your case 4.
 
If I return 4 port NVR for 8 port NVR would I now be able to access 6 cameras via the lan port
 
FYI replace this NVR with a 16ch, buy an 8ch and you'll be back in this boat again with another 3 cameras.. buy far more channels than you think you need now and you wont run out later when all your plans go to shit.

I started off with 4 cameras and not thinking i'd really install more than 8, now I have 13.. glad mine's 16ch.