New cams at our command center

bababouy

Known around here
Mar 29, 2015
1,048
1,629
almost to the bottom
We recently moved our command center to a new location. This means installing some new cams and access control for the doors. We ran cat6 everywhere and we will end up with several NVRs and several different areas with displays. We are using Dahua n24cg52 starlight turrets, which are the ePoE replacements for the n24bg52. We decided to use the mounts with these and drill smaller holes in the tilt-wall.

20190122_113936.jpg 20190122_113941.jpg 20190123_144717.jpg 20190123_144722.jpg
 
looks nice, nice, but you could have got away with IPC-HDBW4231F-E2-M/M12 (Dual Lens Cam)
IPC-HDBW4231F-E2-M/M12

DH-IPC-HDBW4231F-E2-M-M12_thumb.png
 
Use deck screws, not drywall screws. They don't rust, anywhere nearly as fast, so they can be removed without using a hacksaw after the head twists off.
 
  • Like
Reactions: advanced cctv