New Firmware for IPC-HX5X3X-Rhea_MultiLang_PN_Stream3_V2.800.0000013.0.R.191202.zip

mmmburritos

Getting the hang of it
Joined
Jun 28, 2016
Messages
70
Reaction score
44
Thanks, yes, I agree that there was likely something serious to have triggered such a rapid re-release, and not knowing what sure sucks. I did go ahead and update one camera to V14 earlier and did not notice anything different at all. Sigh, probably best to apply it to my other 3 cameras based on nothing but "huh, I wonder what they fixed that was so important".
Yup, and presumably if it's security related, they want to keep quiet about the details so as to not encourage people to take advantage of it....that's my thinking at least.
 

qwert106

n3wb
Joined
Dec 5, 2015
Messages
25
Reaction score
7
Buttons seem to come back with Internet Explorer, but as you can see in the attached images, using the web UI with IE is even less usable...

Yes. I record IVS/tripwire motion on a memory card in the camera. I also have a Dahua NVR that also records 24/7 but I only use that when the short recordings on the SD-card is not enough.

Well, since the timeline is not visible anywhere but on the old Pale Moon browser; I don't know. But it works fine there.
is there any solution? i have the same problem
 

iseeker

Getting the hang of it
Joined
Nov 16, 2018
Messages
229
Reaction score
90
Location
TEXAS
@EMPIRETECANDY Any insight on this slightly newer version V2.800.0000014.0.R.191203 for the 5x3x cameras? Seems like it must be important if they released another version dated one day later....the original 1202 release was listed as an important security fix, so for them to issue another so quickly after there must be some reason behind it.
Did you ever get a response to this? @EMPIRETECANDY What are people installing -- v13 or v14? I'm on v5
 

EMPIRETECANDY

IPCT Vendor
Joined
Nov 8, 2016
Messages
8,262
Reaction score
23,723
Location
HONGKONG
DH_IPC-HX5X3X-Rhea_MultiLang_PN_Stream3_V2.800.0000013.0.R.191202 this firmware based on V2.800.0000010.0.R.190807 , have some update for the safety issue.
 

Gadget -X

Getting comfortable
Joined
Apr 23, 2018
Messages
201
Reaction score
69
Not sure about updating firmware on my IPC-HDW5231R-ZEs. When I login camera and do a manual check I get "It is the latest version." I have had a some issues with cameras going offline. Nothing major, sure do not want to brick my cameras.

Thoughts?

Thank You

M

IPC-5231R-ZE.jpg
 
Last edited:

EMPIRETECANDY

IPCT Vendor
Joined
Nov 8, 2016
Messages
8,262
Reaction score
23,723
Location
HONGKONG
Not sure about updating firmware on my IPC-HDW5231R-ZEs. When I login camera and do a manual check I get "It is the latest version." I have had a some issues with cameras going offline. Nothing major, sure do not want to brick my cameras.

Thoughts?

Thank You

M

View attachment 59900
That is fake, that button from my experience, not work at all for the old models. Just flash your camera's firmware with the one i posted.
 

Gadget -X

Getting comfortable
Joined
Apr 23, 2018
Messages
201
Reaction score
69
So which file do I use?

...PN_Stream3_V2.800.0000013.0.R.191202.bin (Andy Dropbox)
...NP_Stream3_V2.800.0000014.0.R.191203.bin (wiki Dahua)

I only have ONE issue. I would like to record continuously on SD card. I have replaced the SD cards with 128GB Samsung Pro Endurance after SanDIsk Ultra failures, now no failures but all 9 cams IPC-HDW5231R-ZE still haphazardly recording. No error logs. After reading this thread a few times not sure it is worth the chance of updating from 2.622.0000000.23.R, Build Date: 2018-03-30 if it does not fix this ONE issue.

M
 

EMPIRETECANDY

IPCT Vendor
Joined
Nov 8, 2016
Messages
8,262
Reaction score
23,723
Location
HONGKONG
So which file do I use?

...PN_Stream3_V2.800.0000013.0.R.191202.bin (Andy Dropbox)
...NP_Stream3_V2.800.0000014.0.R.191203.bin (wiki Dahua)

I only have ONE issue. I would like to record continuously on SD card. I have replaced the SD cards with 128GB Samsung Pro Endurance after SanDIsk Ultra failures, now no failures but all 9 cams IPC-HDW5231R-ZE still haphazardly recording. No error logs. After reading this thread a few times not sure it is worth the chance of updating from 2.622.0000000.23.R, Build Date: 2018-03-30 if it does not fix this ONE issue.

M
You can try my FW and check if can work, if not then try dahua wiki .
 

Gadget -X

Getting comfortable
Joined
Apr 23, 2018
Messages
201
Reaction score
69
Hi Andy. Great response time :). Have you heard of a record issue like this. I set to manual record and it is hit and miss. I plan to try on one cam. I bought a couple extras from you just in case they brick.

M
 

EMPIRETECANDY

IPCT Vendor
Joined
Nov 8, 2016
Messages
8,262
Reaction score
23,723
Location
HONGKONG
Hi Andy. Great response time :). Have you heard of a record issue like this. I set to manual record and it is hit and miss. I plan to try on one cam. I bought a couple extras from you just in case they brick.

M
The fixed camera not easy to brick, just the PTZ or NVR if use wrong FW very easy brick.
 

giomania

IPCT Contributor
Joined
Jun 1, 2017
Messages
780
Reaction score
538
Hey guys,


Here is the latest new firmware for these models, there has a little update for some bugs, details please check the Release Note.
This new firmware is a important update for Fixing Security Vulnerabilities

General one is without dahua logo
DH one is with dahua logo.

Models support.

IPC-HDW5231R-Z/ZE
IPC-HFW5231E-Z/Z5/Z12/ZE/Z5E/Z12E
IPC-HDBW5231R-Z/ZE
IPC-HDBW5231E-Z/ZE
IPC-HDW4231EM-AS/ASE, IPC-HDBW4231F-AS, IPC-HDBW4231E-AS/ASE , IPC-HFW4231S,IPC-HFW4231E-S/SE.
IPC-HDBW4431F-AS
IPC-HDW4XXX-ASE
IPC-HDW5XX-ZE
IPC-HFW5XXX-ZE
IPC-HFW4239T-ASE
IPC-HDBW4239R-ASE
IPC-HDW5831R-ZE
IPC-HDW5631R-ZE

Please make a default after make the update, and make sure the cams you are using is on the list. Hacked Chinese models, please don't use this firmware to update. If you have any doubt just send message to me for double check.

Andy
I noticed that the IPC-HDW5231R-Z/ZE is listed, but not the IPC-HDW5231RP-Z, so thought I would check to be sure it is safe to apply? Here are the part number details from my cameras:
IPC-HDW5231RP-Z (P/N: 1.0.01.04.18696 S2)
IPC-HDW5231R-Z/ZE (P/N: 1.0.01.04.18696 S3)

Thank you.

Mark
 

EMPIRETECANDY

IPCT Vendor
Joined
Nov 8, 2016
Messages
8,262
Reaction score
23,723
Location
HONGKONG
I noticed that the IPC-HDW5231R-Z/ZE is listed, but not the IPC-HDW5231RP-Z, so thought I would check to be sure it is safe to apply? Here are the part number details from my cameras:
IPC-HDW5231RP-Z (P/N: 1.0.01.04.18696 S2)
IPC-HDW5231R-Z/ZE (P/N: 1.0.01.04.18696 S3)

Thank you.

Mark
The old model R-Z can make a try. We test it working fine, not sure if the earliest version can suit or not.
 

deeuubee

n3wb
Joined
Nov 1, 2016
Messages
26
Reaction score
2
Andy, I bought four IPC-HDW5231RN-Z (P/N 1.0.01.04.18696) a few years ago. They are not on the list. They have never had the firmware updated.
Can the firmware be updated with the version listed in the first post?
 

EMPIRETECANDY

IPCT Vendor
Joined
Nov 8, 2016
Messages
8,262
Reaction score
23,723
Location
HONGKONG
Andy, I bought four IPC-HDW5231RN-Z (P/N 1.0.01.04.18696) a few years ago. They are not on the list. They have never had the firmware updated.
Can the firmware be updated with the version listed in the first post?
Can make a try, if the IPC-HDW5231R-Z not very early, then still can work well.
 

EMPIRETECANDY

IPCT Vendor
Joined
Nov 8, 2016
Messages
8,262
Reaction score
23,723
Location
HONGKONG
There has an urgent update for this model, please go to update it asap.

 

Gadget -X

Getting comfortable
Joined
Apr 23, 2018
Messages
201
Reaction score
69
Scariest thing I have done with cameras in a while, upgrade a "perfectly" working camera. Here what I ended up with. Going to upgrade all the 9 cams after a 24 hours period or so...

M

Screen Shot 2020-05-20 at 10.03.26 AM.png

Screen Shot 2020-05-20 at 10.02.56 AM.png
 

Gadget -X

Getting comfortable
Joined
Apr 23, 2018
Messages
201
Reaction score
69
Update - After communicating with Andy (EMPIRETECANDY) I upgraded all my cameras to version V2.800.0000015.0.R Build Date 2020-0403. No issues with cameras or on either NVR, NVR5216-4KS2 or my ONVIF NVR. I am not using any alarms, email notifications, trip wires etc... so hopefully all those features will also work for others.

M
 

Panopticon

Young grasshopper
Joined
Dec 13, 2017
Messages
50
Reaction score
17
Hey all you Guys - do you realise there is a Newer Firmware Version also covering security vulnerabilities at...

There has an urgent update for this model, please go to update it asap.

 

EMPIRETECANDY

IPCT Vendor
Joined
Nov 8, 2016
Messages
8,262
Reaction score
23,723
Location
HONGKONG
Hey all you Guys - do you realise there is a Newer Firmware Version also covering security vulnerabilities at...
DH_IPC-HX5X3X-Rhea_MultiLang_PN_Stream3_V2.800.0000016.0.R.200605.zip
It's not an official releasing one, so better not to update it till we full testing on it.
Still test on It
 
Top