Newer Version of BI does not support old MPEG4 camera, why?

wepee

wepee

Getting the hang of it
Jul 16, 2016
255
59
Hi BI forum users,

I had a hard time finding a solution to my problem.

I was troubleshooting for a few hours finally found that the older version of BI support
my old ACTi ACM 1231 1.3MP MPEG4 camera, whereas the new version of BI does not, why?

From the experience that I been using BI for a few years now.....never assume the latest
version of BI will work fine after you have complete fresh install (upgrade) from the previous
working version of BI.

The camera will stream, by selecting the options in BI, make = ACTi model = video port 6002

BI_v4.5.2.0 = ok supported = as shown in the attachment.
BI_v4.6.5.4 = ok supported = as shown in the attachment.
BI_v4.8.1.2= failed to support = cam no signal(not matter what settings I tried).

If anyone can help please do, it will be most appreciated.

Thank you
 

Attachments

  • 2018-09-20_23-06-07.jpg
    2018-09-20_23-06-07.jpg
    243.2 KB · Views: 27
  • 2018-09-20_23-42-06.jpg
    2018-09-20_23-42-06.jpg
    236.5 KB · Views: 27
  • 2018-09-20_23-58-06.jpg
    2018-09-20_23-58-06.jpg
    193.3 KB · Views: 27
Last edited:
I'm experiencing the same issues after the update to 4.8.1.2. Later in the day, I updated to 4.8.1.3 and still have the same issue on any camera using MPEG4 as you mentioned. (Mix of Sony SNC series) I've been trying to do some debugging from my side but am coming up empty. Could there have been an update/change to codecs as part of the 4.8.1.2 package?
 
fenderman said:
Email support.
Click to expand...
Thanks for replying.....but.....Basic (free for 1 year) email support already expired,
do I need to buy Extended / Priority plan, before I email to Ken for requesting support?
 
Normally what is the workaround solution to this? Get a older version of BI and install the update file
and test whether it works or not? :(
 
wepee said:
Thanks for replying.....but.....Basic (free for 1 year) email support already expired,
do I need to buy Extended / Priority plan, before I email to Ken for requesting support?
Click to expand...
yes but he may reply, its only 30 dollars.
 
mrwalsh37 said:
At least for me, and the Sony SNCs I'm running, the update of 4.8.1.4 has fixed the issue.
Click to expand...

Thank for your replying my post.

You said updated..... did you installed BI first on your windows PC and then run update within BI?
Or you downloaded the latest BI from the website, and install a new fresh copy of BI?
 
You must log in or register to reply here.
Top Bottom