I was using that one until I upgraded to V4.001.0000006.1, Build Date: 2021-05-10Does somebody installed the version V4.001.0000006.0.R.210208 ?
Does it support English ?
I'm just wondering why Dahua would shoot themselves in the foot and not work with their own cameras yet still work with non-Dahua ONVIF cameras from other manufacturers - it doesn't make any sense. Modified or not, the 'hacked' cameras are still made by Dahua, they still use the Dahua private protocol on port 37777 and RTSP on port 554, they are still 100% software compatible with SmartPSS - why would they make a conscious effort to NOT support their own cameras ONLY on their NVR's? Greed and money? From my understanding, the only difference between a 'genuine' Dahua and a 'hacked' camera is the language and if you upgrade the firmware it will revert back to all the menus being in Chinese. I can understand not being able to upgrade the cameras - but not the NVR's.If your NVR no big fail, just use the currently fw, your cams can't be updated, a little doubt if can support those cams after update.
Your cams all hacked from chinese models, so better not do any upgrade.
I'm running V4.001.0000000.3 build date 2020-05-19. It's an older 5216 (v1 hardware), it works, and I'm keeping my hands off of it. I already have enough landscape bricks.
If you are running V4 firmware, the maintain/system info page displays the hardware version. V3 firmware doesn't display this info. Other than that my memory is hazy. I think all epoe NVRs are V2. Other than that, it's more difficult to figure it out.Sorry, new to this....how do you tell if it's a v1 hardware or v2?
If you are running V4 firmware, the maintain/system info page displays the hardware version. V3 firmware doesn't display this info. Other than that my memory is hazy. I think all epoe NVRs are V2. Other than that, it's more difficult to figure it out.
YES, all are V2 hardware. Actually they haven't show the V1 or V2 on the firmware.I thought all of the epoe nvrs were v2 hardware. Do I have that wrong?
Use IE.Update went fine, all my cameras are working, just curious if anyone else had any issues logging back in to the web interface? I can't get the page to come back up in any browser I choose. I normally use Chrome for everything never had an issue. Any ideas?
Thanks that worked but had to put in https. Guess the new firmware defaults to use a cert. All good thanks againUse IE.