NVR5216-16P-4KS2E Latest new firmwre NVR5XXX-4KS2_MultiLang_V4.001.0000006.0.R.210208

I couldn't find anymore reporting success or failure on a v1 in this thread. so...
Just updated from DH_NVR5XXX-4KS2_MultiLang_V4.001.0000003.1.R.200813 to DH_NVR5XXX-4KS2_MultiLang_V4.001.0000006.0.R.210208 successfully..
Mine is an older DHI-NVR5232-4KS2 - The original firmware when I purchased this was V3.216 (2018).
 
  • Like
Reactions: EMPIRETECANDY
Do you have to backup all the settings or do they transfer over with the updates?

@EMPIRETECANDY I purchased this from you July 2020 but shows a 2019 build. Do I need a different 2020 FW first; if yes could you please send to me.
Screen Shot 2021-10-10 at 10.50.33 PM.png
 
HMC8403 said:
Do you have to backup all the settings or do they transfer over with the updates?
Click to expand...

I always export configuration before any upgrade. However, I've never had an upgrade require me to factory reset or import the export afterwards on any of my Dahua gear (NVR or Cams). Settings have always stayed.
Just upgraded to DH_NVR5XXX-4KS2_MultiLang_V4.001.0000007.1.R.210827 from DH_NVR5XXX-4KS2_MultiLang_V4.001.0000006.0.R.210208 now to.
 
For firmware updating, No need to do factory reset, just a normal default is fine. Not sure who said always have to do hard reset :(
 
Last edited:
  • Like
Reactions: Andy112 and evldufstr
Am I doing something wrong, I have never performed a reset of any kind after FW update seems to take care of whatever it needs, but I do the upgrade via flash drive memory stick @ the NVR. PS when I update camera's via same method I never do reset, camera must do it automatically and all settings return to as before the update.
 
Make a default mainly for clearing the last fw's history, make the device with all full latest new.
Normal default can keep all the setting you did, factory default will clear all, and set up the system again as new one, will waste of time.
 
Finally had a chance to perform the upgrade. The first issue I have is that some cameras that were not directly plugged into the NVR are not accessible.Screen Shot 2021-12-03 at 6.47.40 PM.jpgScreen Shot 2021-12-03 at 6.45.27 PM.jpg
 
Fixed!! Rebooted the NVR a few times while disconnecting the cameras. Fingers crossed that the only hiccup I run across.
 
  • Like
Reactions: Zook
Latest DL from Dahua web site shows this firmware: DH_NVR5XXX-4KS2_MultiLang_V4.001.0000007.1.R.210827
 
  • Like
Reactions: Scale
i have 3.216.0000000.0, Build Date: 2018-05-30 in my NVR5216/5232-16P-4KS2E. how i can update to newest firmware? is it even necessary?
 
jarnof said:
i have 3.216.0000000.0, Build Date: 2018-05-30 in my NVR5216/5232-16P-4KS2E. how i can update to newest firmware? is it even necessary?
Click to expand...
Unless you have a problem with the NVR you are trying to solve, don't be in a rush to update firmware.
If it's not broke, don't fix it.
Sometimes updating firmware cause's new issues or in some case's bricks the NVR.
 
  • Like
Reactions: bigredfish
My dahua NVR5216/5232-16P-4KS2E has been restarted 2 times this year by itself. would updating help or is the problem somewhere else?
 
hi i have a nvr5216-16-4ks2e i want to find the newest firmware because i can connect with mobile app dmss or gdmss lite all the informatios about my nvr is in the screenshots in attach files
 

Attachments

  • IMG20230304174224.jpg
    IMG20230304174224.jpg
    4.1 MB · Views: 30
  • IMG20230304174239.jpg
    IMG20230304174239.jpg
    3.5 MB · Views: 32
  • IMG20230304174249.jpg
    IMG20230304174249.jpg
    3.3 MB · Views: 32
  • IMG20230304174912.jpg
    IMG20230304174912.jpg
    4.3 MB · Views: 33
  • IMG20230304175037.jpg
    IMG20230304175037.jpg
    3.6 MB · Views: 30
if u advices people like that why are you coming here???
This forum is to find solutions and share experiences not to tell them go to where u buy it... if u don't know tell u don't know
 
You must log in or register to reply here.
Top Bottom