I'm looking to purchase this hikvision set from nelly security. I did have what is probably a newbie question. I'm having a major house remodel done, so I'm going to have the electrician wire the Ethernet. I am going to use POE, so I plan on having a POE NVR, that can power the cameras. I asked nelly about the pinouts for the cable, so that I can instruct the electrician to make the rj45 connectors. What Nelly told me was that it
needs to be T-568B, which is 1:White/Orange 2: Orange 3: White/Green 4:Blue 5:White BLue 6:Green 7:White Brown 8: brown.
I wanted to confirm that on this forum, and also understand if both ends need to be that way? I used to make regular Ethernet cables back in the day, and I had to roll certain pairs(I want to say it was 2,3,4,6)
Can someone confirm the pinout, and if both ends are going to be made the same way?
Thanks.
needs to be T-568B, which is 1:White/Orange 2: Orange 3: White/Green 4:Blue 5:White BLue 6:Green 7:White Brown 8: brown.
I wanted to confirm that on this forum, and also understand if both ends need to be that way? I used to make regular Ethernet cables back in the day, and I had to roll certain pairs(I want to say it was 2,3,4,6)
Can someone confirm the pinout, and if both ends are going to be made the same way?
Thanks.