POE Flood Light with ip camera pass through...

Hi - in the PM you asked about power during the daytime - I wanted to share with others

A) passive injector for one 20 watt flood is the ( follow link) WS-PS-48v30w plus this WS-POE-1-WM

Daytime power is zero

B) there are many poe+ switches - like this https://www.amazon.com/gp/aw/d/B074...X236_SY340_QL65&keywords=802.3at+switch&psc=1

Daytime power is 300 mw each because that is the 802.3at spec. We can dump that energy into the LED or into a dummy load. Or, you can disable keep alive and the switch port will cycle on/off in the negotiation phase until dusk when the full 20 watt load turns on.

Murray
 
As an Amazon Associate IPCamTalk earns from qualifying purchases.