Poe question

So if i get a good splitter do you believe that injector will then be able to power camera during periods when ir is on?
 
Cameraguy said:
So if i get a good splitter do you believe that injector will then be able to power camera during periods when ir is on?
Click to expand...
if the camera does not need more than your injectors and splitters can provide...they dont publish that vital info...who knows...its all a crap shoot...
 
fenderman said:
if the camera does not need more than your injectors and splitters can provide...they dont publish that vital info...who knows...its all a crap shoot...
Click to expand...
Gonna try this.. do you think that sunba splitter could be the reason the camera is shutting down during times ir is powered?
 

Attachments

  • Screenshot_20170715-231411.png
    Screenshot_20170715-231411.png
    358.3 KB · Views: 15
Cameraguy said:
Gonna try this.. do you think that sunba splitter could be the reason the camera is shutting down during times ir is powered?
Click to expand...
i have no idea...it could be many things...the camera, the injector, the splitter, the camera itself could be drawing more power than sunba thinks it should..
 
fenderman said:
i have no idea...it could be many things...the camera, the injector, the splitter, the camera itself could be drawing more power than sunba thinks it should..
Click to expand...
Think i will just give up and run romex and cat6 to camera..
 

Attachments

  • Screenshot_20170715-233535.png
    Screenshot_20170715-233535.png
    218.8 KB · Views: 13
Yea camera works great with the 12v adapter.... Ive basically given up on the thought if poe+ .. my run is like 150 ft and i think the camera is so big and pulls way too much power. Just gonna get some good sheilded cat6 and run with romex to a junction box with outlet.
 
I haven't tried it, I just know of it's existence as I was chasing some info for possibilities for a different setup recently. You'll have to check the specs but it appears that 12v 4a at 100m is available, selectable dip switches, DC Output Voltage: 12V/ 4A, 19V/ 2.6A, 24V/ 2A
I can't guarantee anything.....
.....The POE-171S simply splits data and the power into three outputs (12V / 19V /24V DC) up to a distance of 100 meters. If the POE-171S is paired with the POE-171 PoE injector from Planet Technology, it can provide the following additional PoE blah blah...
 
Yea.. ill just run romex to the junction box at camera
Should look like this if my plan works except mounted to a post
 

Attachments

  • 123_1.jpeg
    123_1.jpeg
    52 KB · Views: 14
Cameraguy said:
So cranking the ir down did not help the power issue..

I guess i need to know can i get an injector that safely supplies more power.. and if not...

Can i run romex 12-2 uf along with cat6 thru conduit without too much interference?
Thanks everyone
Click to expand...

I would worry less about the interference than I would about National Elect Code compliance issues; co-mingling data and power in the same conduit doesn't meet code. Different jacket insulation voltage specs.
 
You must log in or register to reply here.
Top Bottom