PTZ not working

[TidalWaveOne]

Can anyone direct me to some help in getting the PTZ to work in Blue Iris with this HooToo® HT-IP211HDP camera?
http://www.amazon.com/HooToo®-HT-IP...1?s=electronics&ie=UTF8&qid=1418783510&sr=1-1

I am accessing it over the Internet so I had to set up some port forwarding rules in my router, in case that matters. Fortunately I was able to get the video to work.

How would one go about finding the proper settings for the "PTZ/Control" tab for the camera? There are a lot of options to choose from for "Network IP".

Thanks!

 

[fenderman]

Make sure the port number is correct. Select Hootoo from the dropdown..if that doesnt work try Foscam F186xx compatible

http://www.ipcamtalk.com/showthread.php?1710-HooToo-HT-IP211HDP-and-Blue-Iris&highlight=hootoo

 

[TidalWaveOne]

Make sure the port number is correct. Select Hootoo from the dropdown..if that doesnt work try Foscam F186xx compatible

http://www.ipcamtalk.com/showthread.php?1710-HooToo-HT-IP211HDP-and-Blue-Iris&highlight=hootoo

Thanks. Tried them both but no go. However, I am not sure what the port number is suppose to be for PTZ functions. Is it the same as the HTTP port number? What port number is the camera expecting PTZ commands on? Thanks.

 

[fenderman]

Generally its the http port. Also check the camera interface and see if there is a box that needs to be checked to enable ptz.

 

[TidalWaveOne]

Got it! Selected Foscam FI86xx/98xx compatible and it's working now. I may have mistakenly tried another Foscam option before instead of the suggested 86xx option.

 

[fenderman]

Great!