Has anyone been able to get these cameras to connect properly to Blue Iris?
I finally got my 810a camera to connect. But the main stream is so blurred by movement or it freezes on one half that it's useless. The sub stream works as it should. After hours of trying different settings, I will just return this unless someone figured this out. I have several other Reolink 410's and have had some problems, but not as bad as this.
What finally made all the difference was in the Network->advanced->port settings of the Reolink client for that camera. Turn on RTMP, RTSP and ONVIF. I did this for the Reolink Duo 2 and it started working too fyi. (I didn't see this posted elsewhere.)
I have all settings at 15fps main and sub.
Also, I upgraded all software and firmware. You have to find it yourself on Reolink's website.
Here's the setup:
View attachment 140196

I finally got my 810a camera to connect. But the main stream is so blurred by movement or it freezes on one half that it's useless. The sub stream works as it should. After hours of trying different settings, I will just return this unless someone figured this out. I have several other Reolink 410's and have had some problems, but not as bad as this.
What finally made all the difference was in the Network->advanced->port settings of the Reolink client for that camera. Turn on RTMP, RTSP and ONVIF. I did this for the Reolink Duo 2 and it started working too fyi. (I didn't see this posted elsewhere.)
I have all settings at 15fps main and sub.
Also, I upgraded all software and firmware. You have to find it yourself on Reolink's website.
Here's the setup:
View attachment 140196
