EMPIRETECANDY
IPCT Vendor
I will post here today.
I will post here today.
Are these lenses plug-n-play (i.e., screw in/screw out)? Thanks...that big auction site. eg: Surveillance CCTV 3.6mm 6mm 8mm 12mm 16mm CS Mini Lens Fixed IRIS Camera | eBay
Yes, just check the International site. Or check Andy's Vendor area on this board.@EMPIRETECANDY Any updates on the firmware? Along those same lines, does firmware pulled from the Dahua site work on the camera's we are getting from you, or do we need to get our firmware from you?
Roger
It seems to be standard with two cams in one housing. I'd definitely use a Dahua junction box at the least."I do want to mention that this puppy runs HOT. I first set it up in the garage where my POE switch lives, and turned out the lights to check the IR. After about thirty minutes of it running the dark, I was surprised at how warm it was.
I would think one would want to mount this with 1/8" or 1/4" spacers to hold it off the mounting surface to allow a little air flow. Or with the junction box or wall mount. Otherwise At the least, if it matters to you, it will discolor the mounting spot over time.
This is what my cheapo Ir temp gauge read off the base of the cam. Room air temp was 78. "
View attachment 29740
Just got this camera from Andy (great Service) and wow is it hot to the touch. At what point would you think it's to hot. Is this really the standard running temp or is there something wrong? A bit nervous to keep it running at a temp in the 120's attached to my house. Spacers or not.
120 really isn't that hot to building materials. Things get hotter than that in direct sunlight.A bit nervous to keep it running at a temp in the 120's attached to my house. Spacers or not.
I was thinking to get one for indoor use mounted directly to drywall, since it has a low profile, but this is making me think twice.It seems to be standard with two cams in one housing. I'd definitely use a Dahua junction box at the least.
PFA137 | Dahua Technology
Yes, I have it set up now on an NVR 216 however it only shows one camera. There is no option for channel selection. The correct camera model is listed and I have selected it. But only one camera can be used apparently.Has anyone tried this cam with a Synology NAS and Surveillence Station?
Hey Rodger, thanks for posting. What size lens did you get? Looks great!I just installed that camera last week and it is working for me.
View attachment 32782