Review- EmpireTech IPC-T54IR-ZE-S3 4mp Varifocal Turret

Thanks a lot. I got in the GUI with IE mode in Edge. I was able to access my other cameras by clicking the web icons. Then a new tab is opened with 192.168.100.70:10081 . 192.168.100.70 is my NVR IP. the port for other cameras will be 10082, 10083 .... However, the address in the new tab for
B541R-Z4E-S3 is 10.1.1.73 which is the IP the camera gets from the NVR. This IP is not accessible from my PC obviously. I am going to try to plug my laptop to one of the port of the NVR and see if I can get to the camera GUI.
 
  • Like
Reactions: mat200, JDreaming and bigredfish
Z4E.

I connected my laptop to the NVR and was able to get to the camera GUI and zoom in further. Still trying to adjust the focus and find the sweet spot for read the license plate. Making some progress. thank you all for your help.
 
  • Like
Reactions: mat200, JDreaming and bigredfish
I just replaced my damaged 5442 ditch-cam with a new
IPC-T54IR-AS
I can't get my NVR to allow for motion. I've turned on motion on the camera, buy ny NVR, Avycom, will not allow me to turn on motion recording for the new camera, My other two 5442's work fine.. I have reached out to Empire (PM), but thought I would post the issue here as well. It's recording to the nvr 24/7 but no motion.. the whole point to to aid in search for ditch activity..
thanks
Scott
 

Attachments

  • nvr_motion.JPG
    nvr_motion.JPG
    102 KB · Views: 34
  • cam_motion_settings.JPG
    cam_motion_settings.JPG
    64.3 KB · Views: 39
  • ditchcam_nvr.JPG
    ditchcam_nvr.JPG
    229.6 KB · Views: 39
It has been some over 5 years since i bought a camera from Andy based on the information and recommendations from this group. I have several of the IPC-HDW2231R-ZS that have worked flawlessly over the past 5 years, no i need to add a camera, Is the T54IR-ZE-S3 the current version of my HDW2231R-ZS and the goto now?

Thanks
 
hotwheels498 said:
It has been some over 5 years since i bought a camera from Andy based on the information and recommendations from this group. I have several of the IPC-HDW2231R-ZS that have worked flawlessly over the past 5 years, no i need to add a camera, Is the T54IR-ZE-S3 the current version of my HDW2231R-ZS and the goto now?

Thanks
Click to expand...

Yes this is the go to camera and will be a big jump in performance.
 
  • Like
Reactions: JDreaming, CCTVThomas and Clark Griswald
Yesterday I upgraded my two T5442-ZE cameras to the T54IR-ZE-S3. The new T54IR-ZE-S3 is in a different league, especially at night. During the day I see little improvement.
For this comparison I have the new and old cam's at the same settings: Smart IR on, Shutterspeed 8.3ms, Gain 50.
 

Attachments

  • T54IR-ZE-S3.jpeg
    T54IR-ZE-S3.jpeg
    1.3 MB · Views: 149
  • T5442-ZE.jpeg
    T5442-ZE.jpeg
    1.2 MB · Views: 153
  • T54IR-ZE-S3 -.jpeg
    T54IR-ZE-S3 -.jpeg
    1 MB · Views: 149
  • T5442-ZE -.jpeg
    T5442-ZE -.jpeg
    983 KB · Views: 148
  • Like
Reactions: mat200, Smilingreen, flynreelow and 5 others
CCTVThomas said:
Yesterday I upgraded my two T5442-ZE cameras to the T54IR-ZE-S3. The new T54IR-ZE-S3 is in a different league, especially at night. During the day I see little improvement.
For this comparison I have the new and old cam's at the same settings: Smart IR on, Shutterspeed 8.3ms, Gain 50.
Click to expand...

How is the quality of moving objects (ghosting vs clarity at low shutter speed)? Im guessing you are in b/w there because you have no light at all? Im getting close to replacing and older dahua turret with one of these in my alley where there is usually a moderate amount of light but the b/w footage is still of interest
 
Last edited:
just installed this cam, I am loving it, great night time video !
if this 4mp. cam ever gets upgraded to a 1/1.2" version, I will buy 8 of these things.
 
  • Like
  • Love
Reactions: xtropodx, Clark Griswald, mat200 and 4 others
Can someone hook me up with the model number of the bullet version of this? Preferably varifocal and V3 also.

I want this in both turret and bullet
 
Thanks I will get from Andy 's. Amazon store.

I used to order from AliExpress and it usually goes ok but one time it cost me $60 CAD to send one back to China for warranty service. And that's without tracking or insurance which would have been $90 It just appeared back in my mailbox 9 weeks later fixed but no longer water proof

Lesson learned
 
  • Like
Reactions: Clark Griswald, mat200, CCTVThomas and 2 others
Thomas Kenny said:
Thanks I will get from Andy 's. Amazon store.

I used to order from AliExpress and it usually goes ok but one time it cost me $60 CAD to send one back to China for warranty service. And that's without tracking or insurance which would have been $90 It just appeared back in my mailbox 9 weeks later fixed but no longer water proof

Lesson learned
Click to expand...
Most orders we shipped now for US and Canada local stock, not really ship from Asia. Warranty center is at US, so won't pay a lot to do warranty. Normally we replace new camera directly if can't fix up easily. For other countries almost same. If not expensive things just replaced parts or new cam.
 
Last edited:
  • Like
Reactions: Clark Griswald, looney2ns, samplenhold and 4 others
So, I bought one of these critters and cannot get it to initialize. I'm currently looking at a message, "Operation failed," while on the second page of initialization. Got past selecting the country, selected timezone, pressed next, and got "Operation failed." Last time I got "com.OperationFailed." I've been at this for just over 3 hours, and I'm not a happy camper. Probably been through this 20 times, doing a hard reset each time (tiny button under the cover). (Definition of insanity: doing the same thing over and over and expecting a different result.) Had it working once, briefly, but wouldn't respond to PTZ commands. Took advice from one of these messages and tried hard reset. Wish I hadn't. Anyone got a clue how I get past this nonsense?
 
What browser are you using?

Try Pale Moon 32, or Edge in IE mode, or IE if you can run it
 
  • Like
Reactions: looney2ns
You must log in or register to reply here.
Top Bottom