Review-I'll be the guinea pig for the new SD59225U-HNI PTZ.

Try this, send me directly from Dahua

Link: DH_SD-Eos_Eng_P_Stream3_V2.420.0000.11.R.20160912.bin

IgHxE0yl.jpg
 
  • Like
Reactions: ljw2k and Frank van der Heide
Frank van der Heide said:
Well, i can confirm that it works! My zoom in autotracking is back. It takes some time to focus right, but this is workable for me.

I'm now on this version:

View attachment 17975

Check out the samples:


Click to expand...


Did you make any changes in the Global Tab?

Installed this and right off I can say the night settings are much worse for my area. The 2017 FW had a SmartIR setting for the IR light that made a big difference. I will try this out for the tracking today, but if it's about the same I will go for the newest FW with better night vision.
 
  • Like
Reactions: Frank van der Heide
For the PTZ firmware better not to upgrade too frequency, if finish the upgrading also make a resetting. Till now the July.2016 is the most stable one. If any guys want to bring the firmware version back to the Jul.2016, just send message to me.

Thanks.
 
  • Like
Reactions: Solar Deity, Frank van der Heide and hmjgriffon
september 2016 firmware went right in like, super fast, odd thing it said it rebooted but I didn't hear it do the little boot up dance, but it DOES say it is 9/12/2016 so I'm happy, me and Andy think my hardware is a little different because apparently dahua will change the hardware enough for certain firmwares not to work and not tell anyone, lol.
 
  • Like
Reactions: Solar Deity, Frank van der Heide and tdwilli1
hmjgriffon said:
september 2016 firmware went right in like, super fast, odd thing it said it rebooted but I didn't hear it do the little boot up dance, but it DOES say it is 9/12/2016 so I'm happy, me and Andy think my hardware is a little different because apparently dahua will change the hardware enough for certain firmwares not to work and not tell anyone, lol.
Click to expand...
Yeah, that is maybe the problem~ you can share the firmware here if any guys want to upgrade!~ China can't use dropbox, only can send on skype~
 
tdwilli1 said:
Did you make any changes in the Global Tab?

Installed this and right off I can say the night settings are much worse for my area. The 2017 FW had a SmartIR setting for the IR light that made a big difference. I will try this out for the tracking today, but if it's about the same I will go for the newest FW with better night vision.
Click to expand...

Nope, i didn't change anything in the Global tab. I have no idea what that section is about. Changes there don't seem to affect operations of the PTZ.
 
  • Like
Reactions: hmjgriffon and tdwilli1
hmjgriffon said:
september 2016 firmware went right in like, super fast, odd thing it said it rebooted but I didn't hear it do the little boot up dance, but it DOES say it is 9/12/2016 so I'm happy, me and Andy think my hardware is a little different because apparently dahua will change the hardware enough for certain firmwares not to work and not tell anyone, lol.
Click to expand...

Happy to see that it finally worked for you!
 
  • Like
Reactions: hmjgriffon
Frank van der Heide said:
This is how autotracking should work (in my humble opinion):



The bold guy is me btw ;-)

And here another good sample:



So this is with the September 2016 firmware! I'm happy with my PTZ for now. Just anxious to see if i'm still happy after dark ;-)
Click to expand...


Nice! Can you show a screen shot of your intrusion zone and settings for it?
 
  • Like
Reactions: Frank van der Heide
You must log in or register to reply here.
Top Bottom