Review-I'll be the guinea pig for the new SD59225U-HNI PTZ.
- Thread starter looney2ns
- Start date
Frank van der Heide
Pulling my weight
I'm afraid i'm stuck on the new one. But the issue occurred right after i received the Firefox update.
Frank van der Heide
Pulling my weight
[PAL]DH_SD-Eos_Eng_P_Stream3_V2.600.0000.3.R.20170630
looney2ns
IPCT Contributor
Have you tried this: Dahua Starlight Varifocal Turret (IPC-HDW5231R-Z)
Frank van der Heide
Pulling my weight
switched from Firefox to Pale Moon or Sea Monkey .. both versions work.
Frank van der Heide
Pulling my weight
Read the previous posts ....
Frank van der Heide
Pulling my weight
I got 2 firmware versions from Andy that should be working after my upgrade to the 2017 June 30 firmware .. i however get this error message when i try to downgrade:
Anyone with a suggestion? It seems this new firmware doesn't allow downgrading to older firmware .. any help is appreciated.
Anyone with a suggestion? It seems this new firmware doesn't allow downgrading to older firmware .. any help is appreciated.
Last edited:
looney2ns
IPCT Contributor
Over here is further discussion on the 6/30 firmware: all about SD59230U-HNI
Frank van der Heide
Pulling my weight
I think this thread is dead
looney2ns
IPCT Contributor
Frank, are you still having network lag issues?
I installed this 6/30 firmware over the 9/16 version.
It helped tremendously with focus, PTZ controls much more responsive.
I've not experienced any net work lag nor any web interface crashes.
And the tracking: Doesn't work worth a darn, with IVS or the new Auto Track.
But, the IR doesn't control correctly now. When zooming, it now turns on the distant IR too soon (zoom 3) and then the distant IR turns off again at zoom 12-13, so out to zoom 25 you only have the normal IR. Do you see this behavior?
Anyone know if by chance If I flashed the same firmware again, it "might" correct the IR issue?
I installed this 6/30 firmware over the 9/16 version.
It helped tremendously with focus, PTZ controls much more responsive.
I've not experienced any net work lag nor any web interface crashes.
And the tracking: Doesn't work worth a darn, with IVS or the new Auto Track.
But, the IR doesn't control correctly now. When zooming, it now turns on the distant IR too soon (zoom 3) and then the distant IR turns off again at zoom 12-13, so out to zoom 25 you only have the normal IR. Do you see this behavior?
Anyone know if by chance If I flashed the same firmware again, it "might" correct the IR issue?
GuitarKin
Getting the hang of it
I have also same IR problem...
Frank van der Heide
Pulling my weight
Yeah, i still have it. I cannot set the video higher than 20fps. If i set it to 25fps the video freezes every second. In the previous firmware i could easily set it to 50fps without problems.
Frank van der Heide
Pulling my weight
Anyone tried the new firmware and PTZ software yet?
EMPIRETECANDY
IPCT Vendor
Should be ok, just make sure you update both the firmware and the PTZ firmware, after you falsh it, please make a default on the webpage. Then done.
EMPIRETECANDY
IPCT Vendor
Should be ok, just make sure you update both the firmware and the PTZ firmware, after you falsh it, please make a default on the webpage. Then done.
looney2ns
IPCT Contributor
I will be Frank, I had been watching for new release, thanks for posting.
I still have not been able to the correct IR zoom problem. Besides that, the cam has been ok.
Very frustrated with the IR situation.
looney2ns
IPCT Contributor
I failed to mention, I see the same issue with not being able to go above 25fps, without it lagging badly. 60FPS cause's only about 1 frame every 2-3 seconds.