You will see undefined for the most part although certain FW will be locked to certain countries and that field will change
Review: IPC-LPR237B-IR / Equivalent of Dahua ITC237-PW6M-IRLZF1050-B - ANPR, Traffic & Access Control Camera
- Thread starter Wildcat_1
- Start date
I am having trouble with my LPR237B keeping focus especially at night. Does the manual focus actually "stick"? Mine seems to change. I also show two different focus values under "guide" and "configuration". I just purchased it a couple weeks ago from Andy on Amazon.
I think @Billyjack5 mentioned something about focus values having different values on different pages. But i think it is same focus just different scales. From experimenting with mine, it does NOT shift focus between night and day.
And I found the easies thing is to set focus at night, and let the day be close enough. Not a perfect solution but night is more picky on correct focus.
And I found the easies thing is to set focus at night, and let the day be close enough. Not a perfect solution but night is more picky on correct focus.
I had a few different FWs from Andy before I got it working for me. I'm in EU and in my FW I have EU and RUS to choose between.
One odd thing though is that Swedish plates are recognised as Dutch (NL) plates.
I'm on 2.625.0000000.1.R, Build Date: 2021-07-09
One odd thing though is that Swedish plates are recognised as Dutch (NL) plates.
I'm on 2.625.0000000.1.R, Build Date: 2021-07-09
On the other topic, how do you guys hide your cams? Do you hide them at all?
Right now i have it on the soffit and it is a bit "in your face". Was thinking about putting it closer to the road and more covert.
something like this.
or 
but it only puts cam 30-40 inches from the ground. from my understanding it is better off being 70-100 inches off the ground?
Distance from 'decoration' to capture point about 45-50 ft
Right now i have it on the soffit and it is a bit "in your face". Was thinking about putting it closer to the road and more covert.
something like this.
or but it only puts cam 30-40 inches from the ground. from my understanding it is better off being 70-100 inches off the ground?
Distance from 'decoration' to capture point about 45-50 ft
Last edited:
I have tried setting the focus at night, but then during the day it is blurry. It has firmware 2.625.10BE000.0.R, build : 2021-07-19. Does anyone know if this is the most current firmware?
There is 210922 but 2 people reported that it failed to install. So latest working one is 2021-07-19 . unless....
@EMPIRETECANDY Andy is there an update after 210922 ?
@EMPIRETECANDY Andy is there an update after 210922 ?
Perfect new version, no plug in now. And has lots of new features.
Improve the capture adaptability in complex scenes such as multi-lane and congestion. -Refactoring debugging rules, one step. - Support no plug-in, adapt to high version of Google Chrome (high PC performance requirements) - Allow list function optimization - P2P function access - page adjustment, function item integration adjustment - support algorithm independent upgrade - new DDNS, SMTP, SNMP ), PPPoE, P2P, ITCPUSH changed to ITSAPI
Improve the capture adaptability in complex scenes such as multi-lane and congestion. -Refactoring debugging rules, one step. - Support no plug-in, adapt to high version of Google Chrome (high PC performance requirements) - Allow list function optimization - P2P function access - page adjustment, function item integration adjustment - support algorithm independent upgrade - new DDNS, SMTP, SNMP ), PPPoE, P2P, ITCPUSH changed to ITSAPI
Just send you a DM, will release on the IPCT later when we invite @Wildcat_1 do some full testing.
Loaded and will be testing over the next few days
That definitely sounds like a dialing in issue, in other words something that can be fixed in config. As you may have seen from my review, this camera is razor sharp so you shouldn't have any issue. DM me if you need some assistance
Quick update here. Started testing this new one tonight. Good news is that this update works on a cam that DID take 9/22 FW BUT also worked on another cam I got my hands on that would NOT take 9/22. However as I started testing I do see 1 change already that I'm not happy about, bitrate has now been capped to 7963 which is NOT good and I never advocate for. Just letting everyone know as I continue to put this new FW through its paces
Thanks, Wildcat_1. Would be interested in knowing if the vehicle description info is any more accurate in this version. I get a whole lot of Daihatsu and Tatamotors on the 2021-7-19 firmware I'm running.
So i tried on my older camera which is strangely hardware v2 and if fails to update. Tried different computers, tried doing from web GUI and from config utility. Same result, starts loading and gives update failed message.
Device TypeITC237-PW6M-IRLZF
Equipment CodeFPGA
VersionHardware Version2.00
Algorithm Versionlibits v1.0.251932:Jun 17 2020 226327 0.0.0
Algorithm is authorized
Radar VersionSystem Version2.623.10BE000.0.R, Build Date: 2020-06-3
Software Version2.623.10BE000.0.R, build : 2020-06-30Soft Build Time2020-06-30 11:05:19WEB Version3.1.6.872681
Device TypeITC237-PW6M-IRLZF
Equipment CodeFPGA
VersionHardware Version2.00
Algorithm Versionlibits v1.0.251932:Jun 17 2020 226327 0.0.0
Algorithm is authorized
Radar VersionSystem Version2.623.10BE000.0.R, Build Date: 2020-06-3
Software Version2.623.10BE000.0.R, build : 2020-06-30Soft Build Time2020-06-30 11:05:19WEB Version3.1.6.872681
Ok this might shed some light . The one i got from BH was gen1 the one i just got from Andy is gen2 
On the DahuaWiKi 21-07-20 is latest for gen 1 and 21-07-19 latest for gen 2 . @EMPIRETECANDY does your source have fresher one for gen 1 camera?
On the DahuaWiKi 21-07-20 is latest for gen 1 and 21-07-19 latest for gen 2 . @EMPIRETECANDY does your source have fresher one for gen 1 camera?
Any explanation on these guys? Old firmware had min max plate pixels instead. And you can select what direction to scan on different page (front, back, both) so what is the difference between 1 and 2 then 
?
?