Two of my 8 Reolink cameras often freeze (in BlueIris only) to the point were either the live feed or recorded video is unwatchable. The two in question are model RLC-510A and RLC-811A both work fine either via the Reolink app or other app such as VLC Media Player. The FW on all cameras is up to date.
Because the problem only occurs within BI, one immediately assumes it must be a BI setting however...... I have other cameras same model and I export them then create a new camera importing those setting. I change the IP to match that of the problem camera and sure enough, within seconds this new camera begins to act up. Makes absolutely no sense to me at all. I can disable every BI camera except one of the problem cameras,turn off all recording/motion detection/etc and it makes no difference. While this camera stutters/freezes in BI it works flawlessly in the other mentioned apps. Totally frustrated and have completely run out of ideas.
Because the problem only occurs within BI, one immediately assumes it must be a BI setting however...... I have other cameras same model and I export them then create a new camera importing those setting. I change the IP to match that of the problem camera and sure enough, within seconds this new camera begins to act up. Makes absolutely no sense to me at all. I can disable every BI camera except one of the problem cameras,turn off all recording/motion detection/etc and it makes no difference. While this camera stutters/freezes in BI it works flawlessly in the other mentioned apps. Totally frustrated and have completely run out of ideas.