"Sorry, The file could not be found" when trying to view clips/alerts

PCMedic

n3wb
Joined
Jan 12, 2019
Messages
21
Reaction score
1
Location
Virginia
So you have no hardware acceleration turned on for any cameras?


Sent from my iPhone using Tapatalk
Currently running a single camera on my front door and no hardware acceleration is enabled.
 

Skispcs

Getting the hang of it
Joined
Jun 10, 2014
Messages
104
Reaction score
30
I encountered a similar issue after upgrading to 5.0.8.2.
It went away after upgrading to 5.0.9.0, rebooting the computer and rebuilding the database. Not all of those may be needed but it is what I did.
All of the recordings from the time I upgraded to 5.0.8.2 until the update to 5.0.9.0 are unreadable.
 

PCMedic

n3wb
Joined
Jan 12, 2019
Messages
21
Reaction score
1
Location
Virginia
They are readable in my case, but requires either a repair database (rare) or in most cases a reboot of the WD MyCloud. As soon as it reboots, BlueIris again can access the files as usual. Within 2 days average, same process again. Continuous record and alerts all continue to save to the MyCloud, just can not find the files when attempting to view.
 

Skispcs

Getting the hang of it
Joined
Jun 10, 2014
Messages
104
Reaction score
30
Got it, I cannot access any of those recording made during that period.
My recordings that were affected were being made to 4TB internal 3.5 drive connected via SATA.
 
Top