Starlight comes to Dashcams -IPC-MW4231A-E2 2MP Dual Lens Dash Camera

Pmedicj

Getting the hang of it
Joined
Apr 8, 2018
Messages
115
Reaction score
48
That connector was the deal breaker for me otherwise I would have already had one!
I was going to make my own m12 6 pin to rj45 and another cord just to hardwire it to vehicle but I didn't have any luck finding that m12 6 pin either. Just not worth the effort in my opinion.

Maybe some forum member can make up some cords for those interested when its all figured out. (for a price of course)
 

looney2ns

IPCT Contributor
Joined
Sep 25, 2016
Messages
9,215
Reaction score
8,062
Location
Evansville, In. USA
After thinking about it some more, I ordered the Ebay one, and will go the route that @xyvyx suggested.

Based on the above pinout, Anyone know the correct order that 1-2 & 4-5 should connect to a keystone for the Ethernet?

Thanks.
 

xyvyx

Getting the hang of it
Joined
Jun 8, 2017
Messages
40
Reaction score
44
the Pin numbers are the same regardless.. it's just the wire color that changes:
Industrial Ethernet Book


On a somewhat related note (I may post this elsewhere if I tackle this tonight..), I'm about to attempt to repair the ethernet wiring on a 5231 camera that a squirrel chewed through. After cutting it open, I found 6 wires of totally unrelated colors. So I'm probably going to do a similar thing of running the cable into a tiny box w/ a keystone connector.
 
Last edited:

looney2ns

IPCT Contributor
Joined
Sep 25, 2016
Messages
9,215
Reaction score
8,062
Location
Evansville, In. USA
the Pin numbers are the same regardless.. it's just the wire color that changes:
Industrial Ethernet Book


On a somewhat related note (I may post this elsewhere if I tackle this tonight..), I'm about to attempt to repair the ethernet wiring on a 5231 camera that a squirrel chewed through. After cutting it open, I found 6 wires of totally unrelated colors. So I'm probably going to do a similar thing of running the cable into a tiny box w/ a keystone connector.
The pin outs are listed here somewhere.
 

Dunn

n3wb
Joined
Jan 13, 2018
Messages
28
Reaction score
8
yes, it takes an sd card. Full review forthcoming.
I have obtained a male M12 and have the wiring harness completed, cam is up and running.
Do you have that review posted somewhere? Thanks
 
Top