Unable to connect Onvif (Axis) camera to Dahua NVR

Duri

n3wb
Mar 26, 2020
5
0
Slovakia
Hi,
I'm trying to connect Axis camera to Dahua NVR but no success yet. Does anybody have some experience with this?
Dahua - NVR2104-P-4KS2
I tried to connect:
Axis P1435-LE
Axis M3106-LVE
Axis M3067-P
Axis P5534-E
I wasn't succeed in any case. Only what I was managed to do was that I was able to search camera P1435-LE by NVR. But after adding camera to list, system does not recognize password and shows "username or password incorrect". I tried to change credentials of camera also onvif user (Axis camera) but no luck.
Other mentioned cameras...I wasn't able even to search it by NVR.
I've tried several procedures, changing IPs, users, cameras. I've also tried procedure where you set up camera and NVR separately, than manually add camera to list and after that connect camera to specified port. But no luck.
Any Ideas?
Thank you
 
Any Ideas?
You haven't shown the ONVIF configuration details that you are using.
Maybe check if the 'ONVIF port' is other than 80.
One way to see that is to query the cameras with ONVIF Device Manager, which will find them automatically when the PC IP address is in the same range as the cameras.

If the cameras are on NVR PoE ports you will need to set the PC IP address to be in the same range as the cameras and connect the PC to an unused NVR PoE port.

The 'ONVIF port' can be seen at the bottom of the Identification page in ODM.
 
Hi, thanks for response. What configuration of onvif would help if you see it? Below are screanshots from ODM.
Setting of correct IP range is definitely not a problem.
1585320714335.png
1585320780384.png
 
The 'ONVIF port' can be seen at the bottom of the Identification page in ODM.
Well, the 'ONVIF port' is 80, so that's not the origin of the problem.

But I see that the claimed ONVIF version is 1.02 - I wonder if it's just too old for the required compatibility.
And are the cameras old enough that there isn't any newer firmware to try?
 
Click the little pencil icon and enter the login/pass you gave the camera in the popup setting box. The NVR needs to know the login/pass you set the camera to.

Ive had some success choosing the Axis profile on that dialog box as well

NVR-RegPageCameraDialog.jpg
 
  • Like
Reactions: c hris527
FW of the cameras and NVR is the newest. But its true that 1.02 looks old and also M3106 is older model. And also true is that I had best result with newest camera P1435. Unfortunately I don't have this camera on the table any more so I can't compare onvif version right now.
I'm thinking about one more possibility. As I was able to find P1435 by NVR and ti has problem just with login. On camera I had just service login (root/pass) and I'm thinking if NVR is able to use just this kind of week psw as it push to use strongest ones.
Don't you know this Dahua NVR rules?
@c hris527 - I've already tried every combinations.
 
are your on the same lan network ? with ODM create a new onvif user. many time web users differs from onvif user.