Using Spotter Cameras to direct a PTZ where to look in an NVR or Blue Iris and setting a spotter cam as a priority in Blue Iris
- Thread starter wittaj
- Start date
bigredfish
Known around here
You know the 1-1.5 seconds was time to activation, But then you have another sec to turn and get to position, and another .5-1 to get its IVS ears up and running on the preset. AND a .5-1 to get the signal from the spotter to the NVR and out to the PTZ.
So I guess Im saying from initial trigger by the spotter to full "ready to track" could easily be 3+ seconds
So I guess Im saying from initial trigger by the spotter to full "ready to track" could easily be 3+ seconds
bigredfish
Known around here
I double dipped that last part 
But stil 3 seconds is reasonable
But stil 3 seconds is reasonableI increased the ptz speed a notch and now it looks like it takes 3.8secs from spotter onvif trigger until ptz is ivs triggered, so I am happy with that, so you nailed it bigredfish!
I made the ptz preset be alittle ahead, as wittaj mentioned and I think that made a difference as well
I made the ptz preset be alittle ahead, as wittaj mentioned and I think that made a difference as well