warning DS-7600NI-E1(E2) 7700NI-E4 V3.4.91 and V3.4.92

P

Paul Arthur

Getting the hang of it
Apr 30, 2016
216
15
Hi every one just be careful installing update V3.4.91

my nvr is
  1. DS-7608NI-E2 / 8P
i was running before this problem
  1. V3.4.90 build161008
my nvr kept rebooting every 5 mins poe went offline i had to restart the nvr to get the poe to turn on

i updated to v3.4.92 same thing happen so i did a factory reset to stop it rebooting and after that i lost 2 ptz camera i had to update them to work with this update> so don't panic and make sure you have heaps of time to fix it around i did it at 12am and i got it working back at 1.40am

had to rest everything
 
Last edited:
Paul Diaz said:
so don't panic and make sure you have heaps of time to fix it
Click to expand...
Good advice lol!
Interesting that resetting to defaults fixed the problem.
It looks like there could be inconsistencies in a configuration.
I have found the 3.4.91 firmware to be fully stable, like earlier versions. My 7816N-E2 has been up for 4 months with no restarts since I last updated the firmware.

Worth doing now, if you haven't already done it -
Make a backup of your final NVR and IPC configurations, via the NVR web GUI Maintenance page.
Configure your responses to the security questions for the 'Forgot password' new feature.
 
haha thanks yeah i was like SH>T i must go to bed but must fix it

i done a full backup etc and made sure i got the guidfile
and done forgot password thing also
 
UPDATE SYSTEM HAS FAILED AGAIN
it's Starts up then will not show any ip cameras again :( i restart it it shows all the cameras fine it fail and restarts after 3 mins to SHOW NOTHING again
restarted it same thing. :(

about to rest to TO FR and see if it fixs it
 
I am 3.4.91, it been a while since I messing with my Camera and NVR
the current version is .96 is there any reason to upgrade?
 
You must log in or register to reply here.
Top Bottom