My HikVision can't find my router in wifi settings, and even if I manually type in SSID info, it still can't connect. Anyone had this issue?
So I got a new DS-2CD2032F-IW from ebay, the firmware is V5.3.0 build 150814 CCCH. Connected to ethernet, SADP to change ip to 192.168.1.150, as well as subnet mask, gateway, opened up IE and the camera works great under that ip address.
Then I followed Nelly's video here to set up wifi
Wifi search can't find my router, it only found my neighbors'. But I can access my router at 192.168.1.1 through the same PC, and all the phones and tablets connected to it just fine. It's wireless G+N. I tried to manually type in SSID, password, etc, and went to TCP/IP page to change the wan settings to DHCP off with the same static ip 192.168.1.150, saved, disconnect ethernet, rebooted the cam, still can't access it.
Then I tried to disable wireless N channel and keep only G, changed wifi channels, changed AES to TKIP, all didn't help.
I bought two of this and both have this issue. I did reset all the settings. Is there a compatibility issue with my router? It's a Linksys E3000 running tomato firmware.
So I got a new DS-2CD2032F-IW from ebay, the firmware is V5.3.0 build 150814 CCCH. Connected to ethernet, SADP to change ip to 192.168.1.150, as well as subnet mask, gateway, opened up IE and the camera works great under that ip address.
Then I followed Nelly's video here to set up wifi
Wifi search can't find my router, it only found my neighbors'. But I can access my router at 192.168.1.1 through the same PC, and all the phones and tablets connected to it just fine. It's wireless G+N. I tried to manually type in SSID, password, etc, and went to TCP/IP page to change the wan settings to DHCP off with the same static ip 192.168.1.150, saved, disconnect ethernet, rebooted the cam, still can't access it.
Then I tried to disable wireless N channel and keep only G, changed wifi channels, changed AES to TKIP, all didn't help.
I bought two of this and both have this issue. I did reset all the settings. Is there a compatibility issue with my router? It's a Linksys E3000 running tomato firmware.