New profile posts

hikvision DVR password

hi

hello my friends,
first sorry if my english is not very good, i have an indoor monitor dahua vth1550ch-s2 it was under firmware version V4.410.0000000.4.R.20200221 and i updated it with Nordic_V4.600.0000000.0.R.220819 firmware after extracting it we found two part of firmware part1 and part2 i update it with vdp config tool the update of part 1 stoped at 54% and my vth1550ch-s2 went on black screen now its bricked it wont turn on and when i pluged it into the lan cable there is no ip detected or any thing the only thing that show is the red led when i pluged it into power, I unsolder the eeprom ( gigadevice GS25Q127C ) i programmed it with CH341 with the firmware V4.410.0000000.4.R.20200221 and solder it back into the board but nothing hapened still the same problem, can u please post a video or more explain how to use this methode TFTP and TTL technique. i tried all and connect the rx tx gnd but cant have a response via putty or any thing else plz i need ur help.

Thank you.

Hey I’m looking hdw1430v Dahua to frimware. To work English Pliz help me

I have problem I buy camera Dahua dh-ipc-hdw1430v-a. With mechine Dahua English its not suport cam Pliz help I buy 24 cam no have idea

If anyone need Internet Explorer on Windows 11 or Windows 10 here you go.

hello brother .in which link are u talking about at this topic?
i have same problem to add ezviz

Не могли бы вы мне помочь? у меня ptz камера не работает после обновления((

hallo Kitoxel, has du eine andere Firmwaredatei bekommen für die FI9900p ? ich konnte zwar flashen,
habe nun zugriff auf die kamera, aber die firmware scheint nicht zu passen , denn sie bootet nur mit vielen fehlern.
und sie hat ihre Mac adresse bzw ihre ID verloren.
Das SD Recovern klappt nun auch nicht mehr. - Hast du deine FI9900p wieder am laufen ?
wie war der Filename des Files, was du von Foscam bekommen hast ?

flash_FI9900P_1.11.1.5_2.74.1.7_p1.bin diesen link hat mir foscam geschickt, um die "flash_FI9900P_1.11.1.5_2.74.1.7_p1.bin" herunterzuladen .....

I just bought a wscam HD CCTV tester and want to test a swann nhd-865msb camera through an 48v POE. It says the camera is ready. I am a newbe. How can I see video. What are the next steps.

Hi

I'm looking for firmware for dahua nvr7xxx with english, on forum link is death (link from topic dahua mod kit), will be appreciate if You send me some working link

Thanks

Don't see you post much anymore. I hope everything is okay and take care.

My new hikvision nvr DS-7108NI-Q1 is not detecting my ip cameras giving an error message "Network is unreachable" any help?

I appreciate what you are doing in the forum
Thanks you

hikvision password

BI has not shown proper clip count for weeks now. I've done everything but pray to the silver gods. plenty of space, RAM, CPU, bandwidth, just fails after three years. I think the 50th camera did it in. Right now: "new" folder says 795GB - 72,313 clips. UI shows 15,558, 180G. I feel this software has outgrown its capability to maintain integrity. fun while it lasted.

Hi,
can you help me about a hikvision ANPR camera
I have 7 series ANPR camera and NVR with supporting one.

I want it to connect with a gate that opens electrically which connects a motor.

First I want to know the connection to the motor is from the ANPR camera or NVR

Second I want the connection details like its diagram

if anybody knows please help me

Thankyou

confused and making BRICKS

Hi can you help me with my cam hikvison ? i can reset passwaord to cam.

hello i have dahua dhi0nvr5432-4ks2 nvr it was working for a year without any error or signal it stop working the power is working but the system is not runing any one who have any idea tell me please what i shoud check or fix

thanks