New profile posts

Hello Andy. Do you sell analog/HDCVI Dahua cameras by any chance? I know this is a very old tech and most people now buy IP, but I cannot afford to replace all the wiring in the large building I'm planning on replacing cameras.
hello I just bought used Dahua DH-SD49425XB-HNR, WEB VersionV3.2.1.1283440.P9 Version ONVIF21.12(V3.1.0.1207744) V2.401.0000000.64.RHNZ_200219_34642 Secure basic versionV2.2

I can't get the camera to follow him. I think this is the wrong firmware, can you help me? thank you in advance for your help and support
www.ptvc.ch
www.ptvc.ch
autotaking

autotracking doesn't work for me
Hey! I just saw your posts on Slickdeals concerning the Paxvigo cams. Hah, though I went in for 2 of them, there was no way I was going to post on that cam here. The last time I posted (quite a while back) on a non name brand cam, I was sort of lambasted enough to not want to again. :p I'm hoping that they are decent at least as they'll fill a "need" I've had for a single wide angle cam in a couple of spots...
Hey Andy. I'm looking for the PFB203W mount (for the camera I won from you!). I live in the EU. You don't use Aliexpress for us in the EU anymore and your new website doesn't ship to EU (yet?).
Email is now the only way to buy from you?
Hi, I have a Hikvision Hilook DVR, I'm trying to find channel 0 on it (which shows all cameras) but it does not work, I tried routes such as "/Streaming/Channels/1" and "/Streaming/Channels/001", I also looked through the DVR settings and found no Channel-0 Options, Could I get some help please? Thanks
TonyR
TonyR
You posted your question on a profile where you're likely to not get a response. The Hikvision forum would be more appropriate. :cool:

Are you using the complete URL including the RTSP port number with VLC, such as :
rtsp://<user>:<password>@<nvr-ip>:554/Streaming/Channels/001
SpiralIPCT
SpiralIPCT
Sorry there i'm new to this, dont know how it works haha. Yes the URL seems to be in the correct format


I tried:

rtsp://<user>:<password>@192.168.1.50:554/Streaming/Channels/1
and
rtsp://<user>:<password>@192.168.1.50:554/Streaming/Channels/001

Both get an error, however when doing

rtsp://<user>:<password>@192.168.1.50:554/Streaming/Channels/101
It shows channel 1 as expected.

Edit: Also In the Hikvision app, when I enable "Show Channel-Zero" it does not show.
What DVR do you recommend for the following cameras that would provide remote access via local wifi for iMac, iPhone, iPad.
Secure access away from home for portables would be a bonus.

IP4M-1028W connected via ethernet to NETGEAR ORBI Satellite

The following POE devices connected via switch model: AGPS9E8P-AT-96

IP2M-853E
IP2M-853E
IPC-HDW5231

I see this on Amazon but would happily purchase whatever you recommend from you.

Thank you!
Hey, I read in an older post of yours that you use an L3 switch with interVlan routing. I have an L3 switch also and want to put each camera on its own vlan plus the BI PC on another vlan. Not sure if that works the way I want, because I am wondering, if I put everything on their own Vlan but then route it all on the switch, how is that more secure then just having them in the same Vlan? How do you define the ACLs to make sure only wanted traffic is sent to BI?
Regards
My Hikvision DVR is not coming online after I have connected it to the internet router it's not showing online on screen I first thought its the LAN port on the DVR but if I connect the DVR to my PC to check if my system will detect it and my computer does detect it even I can see the DVR on SADP but it's not connecting to the internet for remote view purpose

I tried to download the latest firmware for the DVR but I was unable to get its particular firmware even on the Hikvision website

My DVR is Hikvision iDS-7216HQHI-M1/S

I will like your suggestion and advice on how to go about this.
I am liking your solution to use Ubiquiti for networking and Blue Iris for security cameras. Can I send you a PM for further suggestions/advice?

Deeapk
Hello to everyone. I've just joined again. I was on some time ago but I can't remember the email I had. Anyway I need help with a ptz ip camera. One of the Ethernet pins broke off the camera side socket. I cut the cable and used an ethernet socket from another camera. But the colours are different. I want to fix it as its only an old Chinese camera but an excellent copy of hikvision. I can't work out how to add a picture to show the wiring colour's. Jaimz
TonyR
TonyR
You won't get a response posting on a profile.
Copy your above post and paste into the "Hikvision" forum.
J
jaimz
Ok. Thanks
You want a business security camera systems that you can trust to protect your business. But, trying to find the right solution is overwhelming and confusing. Spotter Security has been designing and installing reliable security camera system solutions for businesses across Canada for over 18 years.