For that price I may try a few of them to brighten up that corner of my yard. 4 would cover perfectly probably. Running power will suck. But I'll figure it out.
According to the Dahua Selection Chart pdf that was posted here, it looks like the HDW5 does work with the PFB203W. Why do you say it doesn't?
PFA137 is the correct mount. Using 3 now, 2 more due to be installed.Is the PFA136 or PFA137 the correct mount for this camera? The Dahua Selection Chart says PFA136 is...but a lot of people in this thread are talking about the PFA137. Confused
As above, the PFB203W and the PFA137 work with the HDW5231. You DON'T want to screw them through your siding, as stated above as well.Is the PFA136 or PFA137 the correct mount for this camera? The Dahua Selection Chart says PFA136 is...but a lot of people in this thread are talking about the PFA137. Confused
So it's ok to put the PFB203W into a vinyl mounting block then screw that into the vinyl siding?
Do you have a link to this chart please?
Thanks for sharing this is what we needed some actual examples of the mounting etc
Thank you sir
Use these for the PFB203W
I like this one. Easier to find the right solution. Page 46 for the HDW5231R-Z
Thanks SD perfect
Doesn't matter which ones you use since it saved in digital but it doesn't hurt to use the one that is standard in your country.
My soffit is hollow too... what kind of support? Is it easy to remove the soffit and put a piece of wood in there to screw it into through the soffit?
Depending on what type of soffit. In the newer home, most soffit are plastic type of material that basically snap in with interlocking joints. You would just locate those interlocking joints and unsnap it then it should easily come off which can be snapped back in place again after you install a piece of wood or material for the camera to mount on to.
