Update: Took the camera down myself. I plugged into the switch with a short cable. It powered on (just like it did before when it was mounted) except this time the config tool found it. I initialized it. So, I guess this eliminates it being a bad camera. I see 2 issues left. I'm going to try to plug it back in just using the poe+ now that it's initialized because maybe it finds it now. If it doesn't find it, I'm going to try the ac adapter and see if it finds it then. If it still doesn't, well then the line is definitely bad somewhere. The problem with these last things is they require someone to hold the camera outside while I check inside. So I will report back when I find a helper lol.