multigamma
n3wb
- Joined
- Jun 26, 2015
- Messages
- 20
- Reaction score
- 0
Attachments
-
53.3 KB Views: 53
-
59.7 KB Views: 53
OK Update success full. What do I have to do now?Presumably the wrong firmware for the camera.
What does the camera now look like in SADP after you have power cycled it?
Perhaps SADP is not working / properly installed. It requires other software, pcap, and firewall rules, which would be automatically handled by prompts on a normal install.
Has it worked at all?
Suggest:
In the browser: http://192.0.0.64
De-install SADP, and re-install, look out for messages such as ' Do you want to allow ...'
In your first screenshot, the upgrade was not compatible and the camera is in 'mini system' mode, as shown by firmware version 4.0.8
In the second screenshot, the update appears to be OK, but SADP does not see the camera.
Suggest you try to find the camera in another way, for example:
In the browser: http://192.0.0.64
If connected to your router, in the router admin screens, check for 'connected devices' and see if the camera is in the list.
You might also be able to find the camera using the Windows open-source tool 'ONVIF Device Manager' from sourceforge.net