TFTP not progress

multigamma

n3wb
Jun 26, 2015
20
0
The upgrade software TFTP non progress.
Because????

attachment.php


is not displayed

attachment.php
 

Attachments

  • image1.jpg
    image1.jpg
    53.3 KB · Views: 53
  • image2.jpg
    image2.jpg
    59.7 KB · Views: 53
What did you do that was different to make it work?
All you do now is shut down the TFTP server - so it won't try another update - and power cycle the camera. Use SADP to set the IP address to what you need, and connect with the web browser.
Depending on the firmware, you may have to initially access the camera via the web browser to 'activate' it or to set a required new password.
 
Ok, I turned off the TFTP server, I rivviato the camera.
The software SADP not find a camera, it is strange ?????

thanks for your help

attachment.php
 

Attachments

  • image4.jpg
    image4.jpg
    138.3 KB · Views: 48
Last edited by a moderator:
did you change the ip of your machine back to your local network? I forgot :)
 
next step would be to make sure the camera power cycles.. ir should kick on at boot and make sure network cables and power is good.. beyond that.. it may be time for another tftp flash. I am assuming firmware was correct for camera?
 
Last edited by a moderator:
Yes, that is odd.
We need some more details.
What type of camera?
What firmware did you install?
What do the lights on the switch or router port show when the camera is powered on? Do they flash after a while?
Does the IR on the camera click on or off when you hold something in front to block the light?
 
the cable network are the ones that i used with the software TFTP, then i tried to connect the camera via the POE or a the power supply, anything.....
 
What camera? What does the label on the camera say (build date).
What firmware did you try?
 
Perhaps SADP is not working / properly installed. It requires other software, pcap, and firewall rules, which would be automatically handled by prompts on a normal install.
Has it worked at all?

Suggest:
In the browser: http://192.0.0.64
De-install SADP, and re-install, look out for messages such as ' Do you want to allow ...'
 
Perhaps SADP is not working / properly installed. It requires other software, pcap, and firewall rules, which would be automatically handled by prompts on a normal install.
Has it worked at all?

Suggest:
In the browser: http://192.0.0.64
De-install SADP, and re-install, look out for messages such as ' Do you want to allow ...'






I think it's a matter of bios.

With 5.1.6 is NOT successful update, I look about two hours and will read "SYSTEM UPDATE COMPLETED"
With 5.3.0 is successful update, I look will read "SYSTEM UPDATE COMPLETED"

attachment.php


attachment.php
 

Attachments

  • image7.jpg
    image7.jpg
    183.2 KB · Views: 31
  • image8.jpg
    image8.jpg
    180.9 KB · Views: 31
In your first screenshot, the upgrade was not compatible and the camera is in 'mini system' mode, as shown by firmware version 4.0.8
In the second screenshot, the update appears to be OK, but SADP does not see the camera.
Suggest you try to find the camera in another way, for example:
In the browser: http://192.0.0.64
If connected to your router, in the router admin screens, check for 'connected devices' and see if the camera is in the list.
You might also be able to find the camera using the Windows open-source tool 'ONVIF Device Manager' from sourceforge.net
 
In your first screenshot, the upgrade was not compatible and the camera is in 'mini system' mode, as shown by firmware version 4.0.8
In the second screenshot, the update appears to be OK, but SADP does not see the camera.
Suggest you try to find the camera in another way, for example:
In the browser: http://192.0.0.64
If connected to your router, in the router admin screens, check for 'connected devices' and see if the camera is in the list.
You might also be able to find the camera using the Windows open-source tool 'ONVIF Device Manager' from sourceforge.net


none of the three solutions, cher nerves
 
I noticed that the LED on the switch, which is connected to the camera does not remain fixed, that turns off and then turns on. The network cables are ok, and the switch also.

If I change the language tools "HIKTOOLS" update via TFTP it is successful, but after the LEDs remain accesses.

While not change the language you experience this problem.