duplo
Getting comfortable
onvif works on these nvrs, but if you turn on DST on camera, it cannot connect to the camera anymore. also onvif device manager cannot connect anymore.
seems a bug for years now.
seems a bug for years now.
Dahua DHI-NVR5864-4KS2 not support custom protocol
- Thread starter dsl504t
- Start date
Yes. Though this camera did not work for me since I lost the custom option, which looks like it might have come back in a slightly different place with this update. I am interested to learn if the "custom" "rtsp" "part" firmware did add that rtsp steam type = custom option and if that would be helpful for others. I have opened the firmware bin and can see it has a small custom-x.squashfs.img filesystem and the installation LUA script looks like it writes it to a 2mb custom partition on the NVR, and I would assume the NVR overloads the main firmware like a patch. I think this has succeeded, but I dont know how to validate what it actually changed. I would be interested to know if others see the rtsp steam = custom option under onvif on a stock NVR. As well as this thread I have also PMd a forum member with experience in firmware hacking to ask for help in seeing what is in this image.
Funny enough I've been trying to get some Unifi cameras (via rtsp) on a brand new Dahua NVR today and yes the custom option is there on the ONVIF tab. Needless to say I couldn't get it to work. Best I could do was getting a camera to go online but no images, just a black screen using Pelco as the manufacturer. Going to try a hikvision nvr tomorrow and see what that can do. And checking within my personal Dahua NVR it still has the option to select Customized on the manufacturer tab and input the stream address, but that will be on older firmware.
I found patches for other firmwares and a doc file describing that it does restore the custom option like we wanted here. Index of /Firmware/Rejestratory/NVR/RTSP fix
Those ones are a set of patches for different models and do include the 5xxx nas as well. I tried the 4xxx one on mine, it installed but no change. I havn't factory reset it or anything to see if I can make the changes stick. Now that I have my cam working on onvif/custom I think I'll stop here as I dont want to brick my nas with too much experimentation, but hopefully these are helpful to someone.
Those ones are a set of patches for different models and do include the 5xxx nas as well. I tried the 4xxx one on mine, it installed but no change. I havn't factory reset it or anything to see if I can make the changes stick. Now that I have my cam working on onvif/custom I think I'll stop here as I dont want to brick my nas with too much experimentation, but hopefully these are helpful to someone.
Last edited:
Well I tried on a 5 series 16 way and it added the custom tab but it didn't like it. It would only accept 1 cam on rtsp at the lowest stream and dropping frames. Tried a hikvision nvr with no problems at highest stream. So basically dahua and rtsp is a no go now.
demesmaeker
n3wb
- Joined
- Nov 17, 2017
- Messages
- 2
- Reaction score
- 0
A workaround is to buy a raspberry pi and install software on it that creates a virtual onvif camera, that uses a RTSP stream as a source...
Please elaborate. Thanks!
Anyone know of any newer modified firmware that brings the custom protocol back as an option when adding cameras?
I recently bought a second hand DHI-NVR5216-16P-4KS2E which has been upgraded to V4.002.0000000.7.R, Build Date: 17-07-2024 and it doesn't have the custom option which i need at the moment to be able to access two cameras which simply refuse to connect via onvif.
The cameras will eventually be replaced anyway because they're rubbish, but in the mean time it would be helpful to be able to add them into this NVR.
The modified firmware linked above is for use with a version older than what is on mine and i daresay would brick the device if it even installs at all.
I recently bought a second hand DHI-NVR5216-16P-4KS2E which has been upgraded to V4.002.0000000.7.R, Build Date: 17-07-2024 and it doesn't have the custom option which i need at the moment to be able to access two cameras which simply refuse to connect via onvif.
The cameras will eventually be replaced anyway because they're rubbish, but in the mean time it would be helpful to be able to add them into this NVR.
The modified firmware linked above is for use with a version older than what is on mine and i daresay would brick the device if it even installs at all.
bangkawarah
n3wb
I have the same problem, on dahua nvr DHI-NVR1108HS-S3/H
there are no custom menus
I've changed several firmwares, the results are the same, the custom menu doesn't appear...
Is there a solution if you want to restore the custom menu?
cheers..
there are no custom menus
I've changed several firmwares, the results are the same, the custom menu doesn't appear...
Is there a solution if you want to restore the custom menu?
cheers..
for 5xxx-4ks2:
General_NVR5XXX-4KS2-Custom_RTSP_11800-221115_PART_V4.002.0000002.0.R.230117.bin
this is not a firmware.. it simply license file which enable custom / RTSP functionality.
for you model RTSP fix don't exists / wasn't published by Dahua..
I didn't even known that Dahua sells 1xxx NVRs...
that model don't exists on Dahua international site..
yes
It has a different version number to the current firmware.
Is that a problem?
The firmware version on my NVR is V4.002.0000000.7.R, Build Date: 17-07-2024