Any stand-alone ONVIF NVR with people, vehicle and animal AI detection?

[TechBill]

check AI -> AI Parameters -> SMD for that channel / camera - is enabled?

It was enabled . I disabled it .. should go enable it again?

 

[TechBill]

check AI -> AI Parameters -> SMD for that channel / camera - is enabled?

is that on camera GUI or NVR GUI?

 

[steve1225]

NVR...
Disable SMD, use only IVS...

You didn't reported are you see events in AI -> AI Search -> IVS for that channel?

 

[TechBill]

NVR...
Disable SMD, use only IVS...

You didn't reported are you see events in AI -> AI Search -> IVS for that channel?

I was still waiting on it to finish .. only keep giving me searching box in screenshot below

 

[steve1225]

1. After disabling SMD, when You go to live view do You see borders around people crossing this line?

2. does You have IVS configured for other cameras? does it work?

3. does AI -> AI Search -> IVS show events / thumbnails for other cameras with configured IVS?

4. does SEARCH timeline show events for other cameras with configured IVS?

 

[TechBill]

1. After disabling SMD, when You go to live view do You see borders around people crossing this line?

2. does You have IVS configured for other cameras? does it work?

3. does AI -> AI Search -> IVS show events / thumbnails for other cameras with configured IVS?

4. does SEARCH timeline show events for other cameras with configured IVS?

1. Yes there bordering going around people and animals entering the intrusion box.

2. Yes 7 other Dahua camera with iVS set including PTZ that are linked to some camera to turn when IVS are triggered. Other cameras still working great for 7 years.

3. yes the regular search show event in video timeline marking it blue.

So far, now the AI search is finally showing videos of AI detection in the thumbnail and showing videos playbacks. But It not marking video timeline blue in regular search like the other camera. Is the newer AI camera still supposed to mark video timeline blue flags like the older iVS cameras we have running for 7 years?

AI search is working now .. but we would like to be able to search timeline in regular search for any blue flag if it possible with the new camera. The NVR is 52xxx series also 7 years old with the latest firmware update installed.

Many thank you for all your help.

 

[steve1225]

So far, now the AI search is finally showing videos of AI detection in the thumbnail and showing videos playbacks. But It not marking video timeline blue in regular search like the other camera. Is the newer AI camera still supposed to mark video timeline blue flags like the older iVS cameras we have running for 7 years?

AI search is working now .. but we would like to be able to search timeline in regular search for any blue flag if it possible with the new camera. The NVR is 52xxx series also 7 years old with the latest firmware update installed.

It means that storage->schedule plan is not setup for this CHANNEL correctly..

 

[TechBill]

It means that storage->schedule plan is not setup for this CHANNEL correctly..

I will double check it again ... it should be in NVR setting correct?

 

[steve1225]

I will double check it again ... it should be in NVR setting correct?

you storing on NVR so yes this is NVR (not camera) settings...

 

[TechBill]

you storing on NVR so yes this is NVR (not camera) settings...

All cameras store on NVR ..

it does record video from the new AI camera 24/7 in the NVR since it was installed 3 days ago. It just not flagging the blue IVS flags in the video timeline is the only issue remaining that I am trying to troubleshoot now.

 

[steve1225]

the new AI modules in NVR (like IVS, Face*, Video Meta Data, AcuPick) are storing own video files with events for own use..

those video files are not related to classic 24/7 time line you see in old SEARCH module..

If you want to have events to record & show in SEARCH time line module, then You must have configured all options in Storage -> schedule..

 

[TechBill]

the new AI modules in NVR (like IVS, Face*, Video Meta Data, AcuPick) are storing own video files with events for own use..

those video files are not related to classic 24/7 time line you see in old SEARCH module..

If you want to have events to record & show in SEARCH time line module, then You must have configured all options in Storage -> schedule..

One thing I noticed in the AI search .. All video playback from new AI camera are only 1 second long .. maybe the flag are in the timeline but very invisable 1 second flag

 

[steve1225]

What NVR model is this?
how fresh firmware it has?

 

[TechBill]

What NVR model is this?
how fresh firmware it has?

NVR - NVR5216-4KS2.
Firmware - V4.002.0000000.7.R, Build Date: 07-17-2024

So far AI is triggering a person but NVR AI search only show 1 second of the clip with 20 second toggle on video player.

AI is not triggering on two big dogs running around in camera view

 

[TechBill]

What is target filter in the camera IVS AI draw rule setting?

 

[TechBill]

I noticed one setting so I went to add to it..

+Event Linkage and I added recording post 10 second to it. Hopefully that fix the 1 sec video playback ..

I have to run out so it'll be an hour or so before I get back to test this setting ..

 

[TechBill]

Adding the Event Linkage with Post-Record did start showing visible blue flags in the search video timeline so that working now.

However, the AI search does show a screenshot result of the trigger and clicking on it only play video for 1 second or just show the same screenshot of thumbnail itself and end playback. I noticed the on thumbnail result .. it showing Detection Human on people who tripped but sitll showing Detection Unknown when dog trips it ... I did both firmware updates on the new camera and shouldn't it show Detection Animal?

Any idea why it doing this?