So I found out what the issue was... major facepalm moment incoming..
Screenshot below for clarity
So yes, RTSP over TLS was enabled.. (I can't remember if this was on by default or if I enabled it at some point) That's all it took
I hope this helps someone down the line.
Not sure if a...
Thanks for your input.. I could try wireshark with some guidance.
As for the buyer, it was a link I got on a youtube video (I found it around here) but then had to settle for another seller as the original one did not ship to my country.. My firmware version apparently is the latest but of...
Besides the Get ONVIF trigger events everything is the same it seems...
I should add maybe for sake of completeness the VTO firmware is 2022-03-18 V4.511.19HC000.0.R
How is your VTO configured? Network etc?
Alright, I thought so but also saw a lot others redact local IPs
Basically all are on the 192.168.0.0 network. VTO is 0.200, BI is 0.251, VTH is 0.197
Everything is under the same vlan, same switch basically.
I can ping the VTO from the BI machine and BI actually finds something when doing the...
@Holbs Thanks for this quick reply. Are you using the MQTT way to integrate?
I was curious (as I cannot find relevant details in the documentation) have you any info regarding the pinouts behind the VTO or VTH unit? I was wondering if any of them could be used to 'close a circuit'. I have a...
Hi Guys,
I've been trying to add this camera for the better part of the past week (on and off) without success..
I put in the credentials + IP in BlueIris, have it do the scan/inspect and it comes up with a mainstream/substream path but all I get is socket error 10054...
I should add it's...
I know I said I'd test but believe me I've been crazy busy lol.. The latest firmware is supposed to help but just because my cams are behind the NVR no way to enable the feature.. So I just got a PoE switch and will reconfigure/connect everything and hopefully there's an improvement WRT the...
Sorry for necro'ing this. I have a Dahua Villa kit camera (with screen/poe switch) and I'm getting socket error 10054 in BI when trying to connect :(
Any guidance?
I updated by downloading the firmware and putting on a pendrive and pushing it from the NVR itself. Some actions can only be done on the NVR and not via the web or windows client.. so annoying given where it's located for me..
Hey, sorry I still haven't gone around inspecting the 'improvements' if any as scientifically as possible.. for starters I was going to setup BI for this (since I'm using the reolink nvr.. I know don't judge). The only way to access the new 'features' is if the cameras are accessible from a...
That's a great question.. I don't have a lot of time on my hands sadly to do a good side by side BUT I will say
1. The NVR is still crap. It seems that the NVR has a set of features it can address on the Cameras while the web interface has another, the phone app another and finally the desktop...