Recent content by TurnipTruck

Greetings, I have existing ICRealtime NVRs to which I am adding Axis P-3215V cameras. The NVR connects to the cameras via ONVIF. After creating am ONVIF user in the camera, I able to see a main stream for the NVR to record. However, the ICRealtime mobile apps look to a substream with reduced...

Using Onvif for most. I think the Axis are connected via an Axis preset in both NVR brands.

There is one ICRealtime and one Hikvision NVR. They both have an assortment of Axis, Samsung and Hikvision cams.

Greetings, What do you guys think of the Dahua DHI-NVR4208-4K? There are quite a few on eBay for good prices. Do these have region issues like the Hiks? Just wondering before I try one. Thanks!

I spoke to the original seller from China. They claim that the firmware cannot be updated by them or anyone else. Could this NVR really be stuck at this old firmware?

Regardless of what firmware I try to send via the web interface, I get "Upgrading Failed" after a few seconds" Any suggestions to proceed? Thanks.

Greetings, In general, when an NVR is set to record motion events, is the NVR detecting the motion in the video stream or is the camera giving a notification to the NVR? I ask because I am looking at several systems made up of a variety of manufacturers. I have not been able to get motion...

What is the difference between the 7608N and the 7608NI?

Telnet is definitely not there. I tried to install the next version from the site that you linked. The NVR showed "Update Failed" almost immediately. Fortunately, I still have control and use of the unit! I would like to try and update. If I kill it, I'll just buy a USA model or a Dahua to...

I tried to telnet into the NVR and it did not accept a connection. I then looked through all the setting in both the Web GUI and on the connected display and could not find any setting to enable telnet. Any other ideas? Thanks.

Great info. I will try the telnet login tomorrow. If I try the multi-lingual updates, must they be done sequentially? If I end of with Chinese menus, any way to revert to English? Thanks!!!

Greetings, I know this has been discussed at length. I spent quite a bit of time reading posts, but could not come up with a solid answer. Therefore I am asking: I have a Hikvision DS-7608N-E2/8P that I believe was brought in via gray market from China. However, all menus have always been in...

I didn't describe the problem very well. The problem is that the NVR will not record motion events from some models of Hikvision cameras. It seems to me that the triggers for motion are generated in the cameras. The cameras then tell the NVR that there is motion. It is in that communication...

Greetings, Wonderful forum!!!! I have the aforementioned NVR up and running. It came from China already set up for English. The problem I having is that it will only record video from certain model cameras (They are all Hik). I was told that a firmware update would solve this. Reading through...