Search results for query: tailscale

Thank you, I think I'm following -- so with OpenVPN I am basically relying on my home PC to be clean and all traffic will flow through that, so assuming my home connection is secure so will the device I'm using remotely? Going back to the QNAP, when you say directly connected to the internet...

...location or encrypt my data when using the internet while connected to an untrusted WiFi, I simply connect to my self hosted VPN (IPSec or Tailscale) and use my home network as the exit node. You can do the same thing with your self hosted OpenVPN by configuring it to route all traffic...

...diagram is working. Replaced an old Asus router (14 years) with a new Asus AX86U. Then added the GL-iNet MT-3000 mini router to handle the TailScale requirements. The MT-3000 has TailScale built in along with ZeroTier. The AX86U can also be modified to host TailScale. The AX86U is connected...

If this doesn't work out... will try others

Why not tailscale and then you can just use remote desktop?

...events on other internet connected devices in spite of BI and the POE cameras being 100% insulated from the internet. As a test, installed Tailscale on a test computer with BI running in demo mode that has internet. UI3 is visible on a phone with Tailscale using the provided Tailscale IP...

...servers) since I am behind CGNAT (i.e. T-Mobile ISP), so can't do port forwarding. But for accessing the NVR from outside I installed Tailscale on my router and I was able to connect to it from outside since I noticed the NVR needs many ports. This week-end I was checking out my AdGuard...

Will do, thanks.

Look into either Tailscale or Zerotier.

Try Zerotier or Tailscale Don't be surprised if NO-IP screws you in the near future. I've had their "Enhanced Dynamic DNS" with up to 25 hostnames for 10 years, since Nov. 2013. They billed my credit card $22 every month and in 2016 it went up to $24.95 per month...no problem. It remained at...

...I switched routers. I stopped being able to check the Cams while I was driving a Giant Bus in Rush hour traffic. :) I figured I upset the Tailscale Applecart but didn't have time to fool with it. the Real Ip address on my LAN of 192.168.0.43 is my PC. My IP of my Blue Iris Pc on the phone app...

Looking for Tailscale users please. TS used to work for me but doesn't anymore for some reason, so I'm trying to troubleshoot and I don't understand this very well. I am no longer able to access anything BI from my phone. I have 2 "machines" in my TS, one is my BI server and the other my...

I use Tailscale VPN works beautiful... :).. ATGPUD2024

Have you tried TailScale VPN?? I have AT&T Home Internet (Cellular SIM card) modem and It works for me on BlueIris no problems... Tailscale Website: Tailscale · Best VPN Service for Secure Networks and Sign up for free for personal use.. It gives you 100 devices max and 3 users max.. :) It's so...

OS is on Samsung 860 EVO with all blue iris storage on a Seagate BarraCuda Q5 2TB (NVMe). The computer only runs BI v5.9.1.5 and tailscale for remote access. Fresh install of Windows 11 (tried 10 previously a few version ago and similar issues). Direct2disk done, Substreams done (huge CPU...

Fab - sincere thanks all. I think I have come down to two options: 1. Use Tailscale and see if I can set up a site to site VPN. Use BI on the main site with a PC, link the second site and tie the cameras in to site 1 VPN 2. Set up BI on separate PCs at each site - but this would mean...

Load of options out there now. Tailscale, twingate, openvpn (asus router built in vpn if you have one also).

...I have determined that the ISP currently does not offer IPv6. All of the reading I have done on this site points to using ZeroTier or Tailscale. I do understand that Tailscale is built upon Wireguard, but I like the fact that ZeroTier has a zero-trust approach which allows me to manage any...

Welcome @folk Looks like you've done some good research already .. my quick take on this .. as you are in Norway, low light performance matters. Thus I would try the 8MP 1/1.2" or 4MP 1/1.8" sensor models .. and also, many of us do not like dome cameras outdoors due to UV / heat exposure. As...

...view them from iphone and android phones as well (I presume Blue Iris Tools covers this?) We can network all the devices on a LAN through tailscale/etc so that's no problem really, but if you have a better solution then please let me know. Ideally the possibility of phone notifications for...

...if it is available at all, and I couldn't say who makes it available. I'd recommend just going with whichever service has the best price/performance (which likely requires a trial run), and then use Tailscale or Zerotier as a peer-to-peer VPN service that doesn't require IPv4 inbound access.

+1 Tailscale I actually run Tailscale on my pfSense firewall. You can even configure an Apple TV 4K (tvOS 17+) as a Tailscale exit node and sub-net router.

I'm running tailscale on my synolog Nas with a subnet router configuration. I can access BI UI and each camera by ip. Actually anything on my network. Been on t mobile for 8 months now

I'm using tailscale . I also setup a subnet router on my synology Nas for tailscale. If you know how to ssh then I would suggest that option. It's working fine for me. I can access each cam as well as BI

...that would be another consideration you will need to make. I would recommend that you only have one device handling routing unless you just like to tinker around with network routing. Have you taken a look at overlay network solutions like Zerotier, Tailscale, or Netbird for remote access?

IIRC, Starlink employs CGNAT so no public-facing IP is available, at least not with IPv4. Being that you're wanting to access a NVR, I'm thinking you could install Tailscale or ZeroTier on a compatible GL.iNET router and access it remotely that way.

...check the cameras using phones, tablets, computers, etc connected to their regular network. As far as remote access, a self hosted VPN, Tailscale, Zero Tier etc are all good options. Which is best is highly debatable - they all have their pros and cons - but none of them is a bad choice...

...Disable P2P / Easy 4 IP on NVR Disable UPNP on router Use parental controls on router to block NVR from connecting to the internet Set up tailscale or zerotier to provide remote access to the network using a computer that's usually on or a compatible router (uncommon, but possible; may...

...Pi with OpenVPN or WireGuard) on each camera site, because AFAIK the cameras doesn't have embedded VPN support (like some Asus routers) Tailscale or ZeroTier. Problems: As far as I know, both solutions are not free and would also require additional hardware as the VPN option above. Modifying...

I do not keep the ZT app on all the time. I only toggle it on when I want to use the BI app on my phone. I have found that having the ZT app running 24/7 does drain the battery quite a bit. We have another long trip coming up soon, so I think I am going to setup Tailscale to try it out.