Search results for query: *IPC-HDW4231*

You are 100% correct, Something seems really off here, I was actually going to ask him also to ship me one. ;)

The only thing I can think of offhand is that with the newer cameras you don't need to open them up to get to the reset button. For a less helpful comment, I've been following this thread with some disbelief of what's happened to you. Over about 6 years I've brought up about 30 cameras without...

I have four HDW4231EMP-AS cameras that were purchased new in 2017. They were never powered and remained in their original boxes. I plugged them in and the Dahua config tool says that they are all initialized with an IP address of 192.168.0.123 which doesn't seem to be the default IP for Dahua...

I have two ip cams for my driveway. Garage Door: On left is the Dahua IPC-HDW4231EM-ASE On right is the Annke NCD800 Dual Lens (I do have a street light pole in front of my home.) I am looking to move the Dahua on the left with something else witch can see the people better, it will be about...

I'm trying to decide between T5442TM-AS-LED and T5442TM-AS (IR). I usually have enough ambient light to stay in Color mode and I want to keep that. From your statement above, I understand that the T5442TM-AS (IR) is better in B/W mode than T5442TM-AS-LED because of the IR filter that is removed...

I have 10 cameras hanging on trees and fence posts fully exposed to the rain, snow, and temp extremes. No junction boxes, just common sense in the connections. The cameras are so far reliable. I do get a moisture-related failure in a connector about once every 2 years, which so far has been...

The simplest to try, is get yourself an AT+ POE power injector and use that for power. As others have said, and you found out when all your cameras were off, it looks most definitely to be a power issue. An injector like this should (hopefully) solve your problem...

Well, the other day I accidentally saw something which was very odd. I had all cameras off except for the dh-sd50225u-hni, which looks over the parking lot behind my house. I was expecting the mailman, so I turned on my frontdoorcamera, a Dahua IPC-HDW4231EM-ASE. And then I saw it. The 50225...

Yes, I have been successful using that firmware on 3x HDW5231R-ZE as well as 2x IPC-HDW4831EM-ASE and one IPC-HDW4231EM-ASE (all of which provide the same download on Dahua's site). All were successful BUT . . . I always try to remember to stop BI from recording during an update (so the camera...

Hello, I don't if it helps, for me, ivs alert make the switch smart motion human to on. The cross line and cross region doesn't work. I guess that same as here CrossLineDetection not processed correctly in home assistant · Issue #189 · rroller/dahua I have two 5442.

Hi Guys, just wondering if you could help me with solving an issue with the IVS sensors not firing when an IVS event is detected by camera. on 3 cameras IPC T5241TM-AS, motion event and IVS events triger and can be seen in the log and automations easily work using these sensors. however the...

Hi Andy, I tried to download IPC-HX5X3X-Rhea_MultiLang_NP_Stream3_V2.800.0000013.0.R.191202 from Index of /images/Files/Firmware, and there are newer versions. None of them works. Can you please share the link for the V2.80? Thanks

If you picked this up from Andy I would ask if he has a trouble shooting guide .. Otherwise, Power Supply I would suspect .. need a volt meter probably to check ..

I have Dahua NVR, nvr5216_5232-16p-4ks2 (I think 2017) Something happend to NVR, and it will not power on. I looked into manual, there is no text about 'fuse' or anything. Google search also didn't return anything about fuse. What optiond do I have, look for fuse, change power-supply or get a...

Welcome @jarrow Your budget will make things challenging .. Yes, the camera models in the cliff notes are all older models, and newer models are now available. Probably best to try one of the newer 4MP with 1/1.8" sensor models out as you learn more about this topic.

Hi guys, I'm new to the world of IP cams and wanting to start with just two camera's to cover the biggest part of the house and upgrade later. I want to place Dahua turret/eyeball cams on two small detached buildings: the garage and the shed. One problem I have: it's not really possible to lay...

Noted, i will check with them, no need SN No.

Right now, I am using P2P local because I wanted to be notify instantly on my iPhone when alarm is tripped or triggered.

Using Dahua NVR and 8 Dahua camera set up with P2P to DMSS app on iPhone. I have tested and set up both NVR only to local and account devices. Alarm trigger using both intrusion alarm and tripwire alarm. NVR device using P2P to local - notification on iPhone pop up everytime when alarm is...

For some reason i found my Dahua IPC-HDW4231EMP-ASE offline, and traced the problem at the camera wire connector outside. Looks like one of the wires inside the cam plug (female) was lower that the other ones. I tried to fix it but with no luck. All the plug was connected okay and waterproof. So...

SD49225T-HN with 2.622.0000000.7.R.R4.2510.9A.NR, Build Date: 2018-04-04 IPC-HDW4231EM-ASE with 2.640.0000002.0.R, Build Date: 2018-05-23 I won't be in the position until next year with shot-gunning this problem with possible later firmware versions. I'll just turn off my weekly camera reboots...

Your analysis is correct. The Wyze Cam is absolutely insufficient for identification of the suspects or the vehicle, but that doesn't mean they won't work. Consider that even with a good PoE PTZ auto-tracking camera, you may only see hoodies and face masks. The criminals are aware of Ring...

FWIW - I do like the Wyze cameras, however I think of them more as an augmentation of a core IP PoE wired system. The Wyze Camera while a nice little affordable camera does not meet the OPs original specifications fully. The Wyze v3 tech specs are: Resolution: FHD 1920x1080p Viewing angle...

anybody notice that IPC-HDW5231R-ZE with firmware V2.800.0000015.0.R, Build Date: 2020-04-30 the WDR setting does nothing anymore? BLC and HLC work but not WDR. i'm having this issue on multiple cameras at different sites, even with IPC-HDW4231EM-ASE cameras. is this a known issue? also...

Reset cam to factory defaults. Power cycle camera. Make sure that you are using Internet Explorer, and nothing else. The latest firmware is found in the download section of this site. Try again.

Hi I have a general IPC-HDW4231EM-AS that I am trying to update with the general firmware (the one on the first post of this thread) trough the camera Upgrade interface and it does not work If i go in the upgrade menu, I select the file...

Hello, I am building a new system for a friend. I've not shopped or compared for years as my original Dahua / Blue Iris system has been running flawlessly. As mentioned in the title, I am seeking seeking a HDW-5231RP-Z modern day equivalent or better as well as HDW4231EMP-AS modern day...

Just wanted to say that this helped me and unbricked an Amcrest cam of mine after a failed firmware update. I had no way of getting into my camera and it would simply reboot over & over. I was able to download the firmware and flash it using the method above. I didn't have to change any of the...