Search results for query: lorex fan

I prefer the pfa-121 / 122 as the bases are the same and lids are different.. also metal boxes. Amazon .. those may or may not match the holes you are looking for .. and they are "plastic" boxes .. Also note, during the black friday season I have found discounts on junction boxes from usa...

You're confusing me a little. :) What is a "the non-battery (hard wired) version"? If you have an Imou DB61i (or the identical Amcrest or Lorex), the battery is also installed in it. As far as I know, the battery is required to power an existing doorbell via the chime kit when the doorbell...

This is a common problem with all Lithium Ion batteries, so it's not a Dahua thing. I have the non-battery (hard wired) version, I'd recommend that one! :)

Yes I agree with you. I just hope that the Imou DB61i doesn't get the same problem with the defective (ballooning) battery as quickly as the identical Amcrest AD410 or the Lorex. :rofl: https://amcrest.com/forum/amcrest-smart-home-f32/ad410-chime-kit-replacement-t16622-s20.html#p45109 Since...

Not all cameras will work with Motion, my 5232E-16P works with Dahua, Amcrest, Hikvision, LTS, Lorex, Alibi, and a few others that are Hikvision OEMs that I can't remember the names.. But don't work with my Amcrest 850EB PTZ lol. Anyway I am using the last offered Firmware. So might be a...

What is "config tool" and where would I find it? For reference, the Lorex DVR died and I'm trying to get these cameras working with a "regular" computer instead. I don't think that I can use the Lorex software in this situation.

I've got an 8 port LOREX. NR908N ...i tink it could be flashed/ upgraded ro a Dahua . I ned to spend more time on my BI computer. That's the ticket for me. ......and Roll Tide. We are in the Elite Eight ! ...final four! :p

Hi - I think I may have made the setup more complicated than necessary. Could someone please review the attached diagram and let me know if this configuration will work as I'm envisioning? Essentially, for another part of the house, I decided to run shorter cables to connect to a PoE switch...

I have IVS rule turned on (intrusion mode), but at night, bugs and lights still trigger motion. Is this normal? I did some searches in this forum and most of you said with AI IVS turned on, you virtually get zero false alerts. I want that! One person said to make sure to turn off "motion...

First post here, and I'm let's say a little more than a little tech disabled. I've more or less avoided anything that requires spec'ing equipment. So I initially was going to go the NVR route with a lorex kit(for simplicity). But the sale price disapeared after I added to my cart, and left...

Not decided for certain yet but OUT of sheeplez socialist demokrazy of NC. Looking around from upstate SC all the way to AR, and a few other places. W NC is the dumping ground for corrupt big city marxists fleeing their own creation. Asheville is a cesspool of filth & insanity; and has ruined...

It’s nice being able to take an old Lorex NVR that’s useless for any thing other than recording and get the features of a 4KS2. One of the other ones I gave to a friend along with a couple Lorex cameras and two from Andy. Now he’s purchased 3 more from Andy and wants a bigger NVR, 8 ports isn’t...

I only remembered because I just spent an hour last night and an hour this morning trying to get it to work on another Lorex NVR. My trouble was the Wi-Fi router I was using. Tried on my main network and got it to work

==================================================== It helps if you can type. I can't. Maybe i could set up a meta key? or something with the characters necessary. Just thinking out loud. I can't hit the * key in time to slow rhings down and then try to type my command in. Yep i've had a...

I'm trying to figure out how to upgrade the firmware for a Flir/Digimerge/Lorex branded DNE12TL2 camera. I used the way back machine to find the Digimerge web page where the most recent firmware was once located...

Well, speaking of Good Ol' Murphy, he struck again. One of my Lorex NVRs went "pop" today. Lost all but 4 ch of the POE+ supply. NVR still works, but will not feed POE/POE+ except on ch 13-16. I could still use it & hang the cameras all off POE switches, but my experience is once electronics...

Thank you for enlightening me with all this good information! Very helpful. When I hooked up the computer to the same internet connection, I think I used Chrome to find the camera. :oops: I didn't check my computer's IP address either when I used this connection. Maybe I should connect that...

Yeah, by default a Dahua NVR will assign IP cams to the 10.x.x.x subnet, so if your computer IP address was not on 10.x.x.x then you won't see the cameras. What browser are you using - you need to use Internet Explorer (yeah we know LOL) or Pale Moon 32-bit. Edge or Chrome with the IE tab may...

I'm trying to reinvigorate an old Flir/Lorex camera system. The camera in question is a Flir branded DNE12TL2. It won't do dhcp, but wireshark tells me that it wants to be 192.168.1.108. It doesn't serve port 80 (http), but at one point, I got it to give me a telnet prompt and tried the...

Thanks for this. Ended up finding out that the NVR stopped working some time ago....

Hi, I have a Lorex NVR with several Cinnado ONVIF wifi cams that need their dedicated Wansview app / AJcloud to be configured. My security network is in a dedicated subnet, behind a Fortigate firewall. I now wish to block all WAN communication from that network except for what is necessary for...

Thank you! When you say we normally just get an additional Wi-Fi router for the Wi-Fi cameras, the Wi-Fi router runs independent from to the NVR rather than being hooked up to it right? (i.e. the Wi-Fi cameras will run entirely on a parallel system, though may be linked to the same app (i,e...

Hi @flatwht Lorex sells mostly dahua oem products. Dahua and Hikvision are close competitors and each make a wide range of products. You can get cheaper smaller sensor cameras fr9m each one as well as much better cameras also. Do plan to get more that 4 cameras outdoors once you get the hang...

Hi all, brand new here but thought this is a great place for asking this question. I am looking to purchase a set of CCTVs for our house. We plan to have 4 outdoor cameras (ideally POE), one doorbell (ideally POE) and potentially one or two indoor cameras (can be wireless) with AI capability...

The NVRs from various manufacturers in my experience use a proprietary HDD layout that's optimised for the specific use case of an NVR recording multiple continuous video streams. They don't use any of the common general-purpose layout schemes. If you do a Google search, you should be able to...

First Ill say I always do a graceful shutdown using the NVRs console with HDMI & mouse. OK I've put the 16TB in the NVR by itself using the original power/data cables from the original drive. It boots up with a drive error and still from the console I get operation failed when trying to format...

FYI - seen reports, that Lorex does have some good techs .. takes some luck to reach one. Most are just lower knowledge employees following scripts. So plan a strategy to try to get to a good tech when you call ..

Good luck on the call to Lorex - I suspect you know more than the agent you will talk to and will come back saying that is an hour of your life you won't get back LOL. They are not required to provide a "quality" drive, simply a HDD as this is a consumer brand system. As long as it survives...

I got the NVR directly from Lorex. Ill call them tomorrow also. I've worked with linux since the early 2000s I have a sabrent sata caddy I can stick the new drive in and use on a linux pc I have to create partitions on. Just straight ext4 type? and should I create a partition with exactly...

Lorex NVRs are Linux based, but store video in .DAV file format. I believe yours is an older DVR type, and I have zero experience with those Lorex machines, so I could be wrong about the file formats therein. Assuming it is .DAV file video, yes you could pull the HD, copy or read the DAV...