Search results

  1. J

    I need a 12 volt NVR or DVR

    there 6 or 700 cold cranking amp car batteries the customer bought at sears auto center. I would have to go out the the garage tomorrow to verify.
  2. J

    I need a 12 volt NVR or DVR

    I have an empty building that i take care of for a out of state customer. So that i didn't have to drive an hour each way to go check the building several times a week i set up a system off of 12 volt car batteries. There are 4 batteries hooked up running everything and get about 10 days...
  3. J

    Dahua 2MP 25x Starlight IR PTZ Network Camera (SD49225T-HN)

    I've found that both of my lenovo 4k laptop's do this. But my computer's with a 1080 display work fine.
  4. J

    Ubiquiti US-24-250w fan noise?

    I have 3 of these switches. Was surprised how loud they were when they get warm. I have There pro gateway, 2- switches, nvr, and BI Server running in a closet That is kept at 70 degrees and i can hear them down the hall with the door closed. There reading 49C and a fan level of 70. Any idea how...
  5. J

    Dahua 2MP 25x Starlight IR PTZ Network Camera (SD49225T-HN)

    It has a motion sensor and its only when dark. There's 3 different settings. I have both wattages and use them behind my garage with my cams
  6. J

    Dahua 2MP 25x Starlight IR PTZ Network Camera (SD49225T-HN)

    Or you could just get 1 of these POE Flood Light with ip camera pass through...
  7. J

    Dahua Mobile Camera video sample

    @jmcu setup is sweet and the only way to run ptz cams. For fixed cams and recording while driving it can be done with the right home NVR and router/access point you can run everything without a inverter since most of the cheaper devices have 12 volt wall warts powering them. For $200.00 I can...
  8. J

    Dahua Mobile Camera video sample

    I have an amcrest NVR 4108 and when I opened it up to put hard drive in there was only a 2"x3" board in it then cable to the buttons. And it's 12 volt power might put in a smaller case for use in a vehicle. Since it's 1080p 8 cams. I bought to use on a job site that has no power everything is...
  9. J

    Dahua Mobile Camera video sample

    Nice video @Billywho I talked to Andy yesterday and said it would be march to get the mnvr1104 with all the options. gps, 3g, and wifi modules. Still haven't decided if i am gonna order it yet but did order 1 of these 4k cams to checkout. All mine are hobby also need to find a cheaper...
  10. J

    Dahua Mobile Camera video sample

    @Kevin Penney Dahua does make a recorder with 4g access i have been talking to Andy about it and ordered 1 of these cams. 4 Channel PoE Mobile Network Video Recorder MNVR1104
  11. J

    How to make one camera trigger cause another camera to go to preset

    This is what i use for my cams -----192.168.1.xx:xx/cam/ptz1/preset=4 I don't have to use user names or passwords since this is just telling BI to use preset in BI. You have to use the short name of the cam ex-ptz1 Sorry if this has been covered but looks like your trying to use http commands...
  12. J

    Dahua 2MP 25x Starlight IR PTZ Network Camera (SD49225T-HN)

    Yes it's possible thru BI and Dahua NVR's
  13. J

    Quick Question...why would one ever need/want a PTZ?

    There just fun. I have 3 auto tracking and 2 regular ptz. The auto's scan around presets unless there tracking. I have fixed cams everywhere and each 1 that is within sight off ptz will send a command when there's motion, To 1 or more of the ptz's causing that cam to zoom to that area. Really...
  14. J

    What do you use for a Router? Need replacement advice

    Thanks for everyone's input i got the gateway, cloud key, 2-24 poe switches, and 2 AC-AP-Pro. I have everything up and running. Only thing i havn't got working is accessing the system from another computer and the cloud key working. sent a administrator request and opened up on another computer...
  15. J

    Dahua 2MP 25x Starlight IR PTZ Network Camera (SD49225T-HN)

    I am using Dahua/Q-See RSTP and works fine with BI
  16. J

    What do you use for a Router? Need replacement advice

    Thanks@giomania there gateway has a wan port but there router doesn't. I still haven't gotten a definite answer on if I need both. I joined there forum's trying to find out. This stuff is a little bit of a learning curve from the Netgear stuff I have used. Just spent 1200.00 on this stuff and...
  17. J

    What do you use for a Router? Need replacement advice

    Thanks Guys, I have been looking at the Ubiquiti products and bought 2-24 port poe switches and Ap's just trying to figure out if i need a router or a gateway. Gateway has wan port router does not. Or do i need both? Anyone know? Thanks
  18. J

    What do you use for a Router? Need replacement advice

    Sorry wasn't sure where to post this for some advice on routers. Please move or delete this thread if it is in the wrong area or not allowed. I had a netgear 8500 router that the wan port died, It worked and did vpn. But also would have to reboot monthly cause of not being able to connect to...
  19. J

    Dahua VTO2111D-WP Information and Hacking

    I just got this cam a few weeks ago and got to work with BI But my Dahua NVR it shows but black picture. not sure why
  20. J

    About mini ptz sd12200t

    FYI That model doesn't zoom only pan & tilt so it has a fixed lens
  21. J

    Can BI use 2nd video sub streams?

    Also is there anything on the site for networking? I have a room with router and switches that 15 cams on the house feeds 2, then a garage out back with switches out back that handles 9 cams. trying to find the best way to network everything together. I am sure with what i have now isn't the...
  22. J

    Can BI use 2nd video sub streams?

    Thanks @fenderman I'll check the Dahua threads. I can make a cam work but not good on url's need to learn those so i can use my Home Automation to trigger ptz presets I have been playing around with zone crossing and just can't seem to find a happy medium i am using 3 zones example bc-d and...
  23. J

    Can BI use 2nd video sub streams?

    I have run BI for several yrs and works pretty well. (Besides windy, sunny days, with tree shadows) This year i replaced 20+ Cams that were a mix of 720 & 1080 cams with 28 Dahua starlights 2.1 mp. I also purchased a Dahua Ultra Series 4k 32 channel NVR all from Andy. What i am looking to do is...
  24. J

    BI Memory Utilization

    I did read those since my 7th gen had this issue and had to roll back the driver. The 8th gen won't load those drivers since the chipsets are 2 new. But the microsoft generic vga driver seems to work better than the intel. Since i have 16gb of memory and using upwards of 12gb running do...
  25. J

    8th Gen I7-8700 Intel Graphics 630 -100% CPU issue

    I just built 8th gen system and i had to load win 8.1 since it was a new install with 24 2.1mp cams it was running at 50% cpu with all cams at 30fps. The intel driver wouldn't load with 8.1 microsoft installed a generic vga driver during install. Once i loaded win 10 and intel driver system went...
  26. J

    BI Memory Utilization

    This was built for comparison between 7th gen and 8th gen cpu. I did read the BI usage several times. I did load windows 10 and as soon as i loaded the intel video driver cpu usage maxed out to 100%. I had BI running win 10 on 7th gen 7700k with the cams at 15fps and machine hovered up at...
  27. J

    BI Memory Utilization

    I just built a pc with 8th generation I7-8700K and 16gb of ram I got win 8.1 loaded and the intel driver wouldn't load cause system was 8.1 when i fired it up and watched rescource meter is showing 1 gb of ram free. rest is used also have 24 Dauhua 2mp cams and 1 8mp. since fresh install every...
  28. J

    Driveway Camera and Lighting - Best Practices?

    @tangent i add the poe 8 watt motion floods powered thru the camera cable. ATX LED Consultants I also got 2 of 20 watt motion floods but havn't got the 20 watt mounted to compare to the 8 watt
  29. J

    Sd59230 can't get smooth video recording

    Also just noticed top left of cam is blurry no matter what setting, while far right is crisp. as you can see in screenshot far left top house, & trees are blurry as you move to the right the houses get more detail
  30. J

    Sd59230 can't get smooth video recording

    @looney2ns checked router don't see any issues. i have 20+ 1080 cams if a network issue wouldn't i have other cam problems?
Top Bottom