Search results

  1. BadBlake

    Setting up a record schedule

    I have a ipcam (Dahua) that I want to create a recording schedule for. I want to have recording active (when triggered) from 0830 to 1030 every day.How to set this up? I'm still on Blue Iris 4.8.6.3. Any help will be appreciated. :)
  2. BadBlake

    Clips and archiving question

    I have a question regarding folder setup, because I'm not sure if I understand this correctly. I set up the "stored" folder to limit 10GB Then I click the "move to folder" option to move to "Aux 1". I'm then assuming this means that when the "stored" folder hits 10GB, it ("stored" folder) starts...
  3. BadBlake

    Run-time error '50003'

    I've got the same issues her. Run ing Win 7 Sent from my SM-G960U using Tapatalk
  4. BadBlake

    dynamic ip address

    ..and then what?
  5. BadBlake

    dynamic ip address

    I have an dynamic ip address account at dyndns.org and would like to use this in Blue Iris, so that I don't have to manually change my ip address (I have dynamic ISP) I can't seem to find out where I can enter my dynddns name into Blue Iris to get this working. I tried replacing it with the wan...
  6. BadBlake

    4.7.0 - March 2, 2018 - MQTT IoT (Internet of Things) protocol

    I hope that we will be alerted when Win XP or Win 7 is no longer supported, as I have no plans on upgrading from Win 7. :)
  7. BadBlake

    IPC-A35 - PTZ function not working in BI

    It started working after switching to the Dahua / Q-See RTSP protocol. Hope this helps and sorry for the delayed answer. :)
  8. BadBlake

    IPC-A35 - PTZ function not working in BI

    Finally got the PTZ functioning on my Vivotek and Dahua. Had to configure different PTZ protocol, which I had assumed BI did in the cam setup. That's it then. :)
  9. BadBlake

    IPC-A35 - PTZ function not working in BI

    This is from my Dahua IPC-A35
  10. BadBlake

    IPC-A35 - PTZ function not working in BI

    That's the one I'm using - ONVIF(OMXL)
  11. BadBlake

    IPC-A35 - PTZ function not working in BI

    I accessed the Vivotek PZ8111 in the ONVIF Device Manager and the PTZ worked The Dahua IPC-A35, on the other hand, could not be accessed. I got the message saying "The security token could not be authenticated or authorized" I'm running the Dahua in wireless mode by the way. I tried wiring it...
  12. BadBlake

    PTZ not working in BI

    I have two PTZ cams (Vivotek PZ8111 and Dahua IPC-A35) that I use inside when leaving my home for longer periods of time. I set them up today but the PTZ function does not work in BI. They worked fine the last time I used them (about 6 months ago), in an earlier version of BI (been updating BI...
  13. BadBlake

    IPC-A35 - PTZ function not working in BI

    Today I setup another cam on BI. It's a Vivotek PZ8111. The PTZ function on this cam doesn't work in BI either. It used to in an earlier version -don't know which one though since I haven't used this cam for at least 12 months, and I've updated BI regularly. so now 2 of my cams with PTZ...
  14. BadBlake

    Break Time

    So if I want to record 10 seconds, I enter 10, right. So if the zones are crossed after 10 seconds, it should again retrigger, and start recording?
  15. BadBlake

    Break Time

    I kind of confused when it comes to "break time". I set up a few of my cams with zones/zone crossing but I'm not sure how to set up the break time for this. Is there a rule of thumb regarding break time with regard to different scenarios?
  16. BadBlake

    IPC-A35 - PTZ function not working in BI

    Deleted the cam from BI and ran the BI setup again, but still not working....strange....
  17. BadBlake

    IPC-A35 - PTZ function not working in BI

    I'm afraid I did, but maybe I should run it again. Good idea. :)
  18. BadBlake

    IPC-A35 - PTZ function not working in BI

    I've had this cam for a while now been very satisfied with it up until now. I only use it when leaving the house for longer periods of time. When I plugged it back in today after not using it for a while, the PTZ does not work in BlueIris. Works fine on the cam's interface though. Any...
  19. BadBlake

    Anybody know what this means?

    I left the Hardware acceleration option on and changed the cam names back to what they were originally, and restarted BI last night. I let the compact/repair option run default at 2:00 AM. Today, the HW VA was not mentioned in the log. Everything seems ok.
  20. BadBlake

    Anybody know what this means?

    Thanks, I'll take a whack at it then.
  21. BadBlake

    Anybody know what this means?

    I don't think that is the problem here. I've had Hardware acceleration enabled for over a week now, but these messages showed up this afternoon. Only thing I¨ve been tinkering with today is changing the cam names.
  22. BadBlake

    Anybody know what this means?

    I found these lines in my BI log today. What does HW VA not compatible mean? 1 14.03.2018 16:47:39 PTZ_SW HW VA not compatible: -1 1 14.03.2018 16:47:40 Inngang HW VA not compatible: -1 1 14.03.2018 16:47:40 Vei HW VA not compatible: -1 1...
  23. BadBlake

    I made a better remote-live-view page [OLD]

    The local timestamp does not work at all for me for some reason. This ocured after the last update. Is there å fix for this??
  24. BadBlake

    I made a better remote-live-view page [OLD]

    It's been working all along up until I upgraded. Did not work perfectly though. After a few logons it was back to AM/PM. But now, AM/PM only, no matter what. Nothing has been changed on my laptop, where the viewer is installed.
  25. BadBlake

    I made a better remote-live-view page [OLD]

    Hi, Been using this for some time now and its great! After the last update however, the local format clip timestamps in UI2/misc does not work anymore. I only get AM and PM timestamps unfortunately, while we use the military timestamps here in Norway. Is there a fix for this?
  26. BadBlake

    Traffic light and profiles greyed out

    I noticed the other day that the traffic light and the profile icon is greyed out on the toolbar so I can't activate or deactivte any of these functions. How do I get these working again -anybody?
  27. BadBlake

    Unable to logon to my Dahua sd 29204s-gn

    Problem solved -I could logon with ie. :)
  28. BadBlake

    Unable to logon to my Dahua sd 29204s-gn

    I've had this camera a while now and I want to add a new preset, but I can't logon to the web interface. I keep getting the message telling me to download the webplugin. I did that, installed it, even retarted firefox and shut down BlueIris -but I keep getting the same message when trying to...
  29. BadBlake

    Dahua cams set to restart

    I have a few Dahua ip cams and in the cam interface, they are all set up to restart once every 24 hours. Is this really necessary, or should I just "leave it be"?
  30. BadBlake

    Error connecting wunderground/ check internet /station id

    Everything is set up properly. I can get weather data from a lot of other id's.
Top Bottom