Search results

What's the recommend settings for blueiris? I'm having problems with picture quality compared to my older 4mp cameras. Attached is a few pics of the settings and one camera that isn't as clear is the new 4k vs. The older camera the image is clearer.

Thanks for getting back to me, I tried that with no luck. I ended up sending it back to Amazon for replacement. Other 9 were no issue. Still waiting for replacement to come and hopefully this last one will install like the others did without a problem.

I disabled the POE on the port for the camera, ran the ping and got a timed out. Turned the POE back on and now I get ping again on 220. Nothing else is on 220 and nothing is on 108 that I would like to reset this thing back to default and start from scratch.

I was using chrome like the other 9 cameras I installed but I did just try edge with the same issue. I think unless there is some way to ssh in a reset or some other trick I'm just gonna send this one back to Amazon and get a replacement. The other 9 and up and working just fine.

I can also get putty to connect to the camera on 192.168.1.220 SSH port 22 but I don't have a password for it and I know I never turned on SSH in the GUI.

Which Also means resetting it isn't working cuz it should go back to 108. I don't have it fixed ip in the router yet and 108 is not currently being used.

I'm getting a Ping back from it on 192.168.1.220 (Which is what I set the static to when I first got in). But I can't get a GUI on 220

No I currently have changed all the ips away from 108. That was probley what started this issue as I was installing several cameras at a time. But I would login and set them to a different static so i could point them. Later I went into my router (unifi USG) and sent them on the router side and...

Yes its on POE power and I opened the door and held the little button in.

What's the proper way to reset these camera's. I tried holding down the reset button for atleast 30sec and still no luck. I have one of Ten I cant access the GUI on. I can see it show up on my network 192.168.1.108 but going to that doesn't find it and pinging it also doesnt ping back. Using the...

Ok I reported and got this email back.

I haven't but downgrading fixed my problem.

Thank I have done this and so far no issues. Hopefully it will get fixed soon.

I have this same problem, Mine keep recording and floods the hard drive.

I'm accessing it using the BI Official app on Andriod. Not sure what you ment on "Not over RDP" Tried the above and still doesn't work. what is all the audio settings supposed to be in both the camera and BI settings.

I'm using blueiris and I can hear audio fine, but what settings do i need to get this came to be able to talk back through the speaker that's built in the camera? Thanks,

Thanks that was easy and is done. Is there any documents or list of other commands that can be done. For example turning the external lights on/off or auto on it. It would be nice to change the BI IR button to the external lighting on this camera.

Can blueiris control the day night switch in the camera vs. the basic camera GUI? Time control doesn't seem to work as well as sunset and sunrise times in BI. I'm not sure if its the way the camera setup in blue iris (Genric/ONVIF and RTSP) but none of the controls seem to work threw blueiris...

I have too but others above said its been fixed, but it hasn't. If I click the change log or update I still have same error.

I still have same issue

Vehicle detection (same with pet) in Blue Iris doesn't exist. It only shows a person. Vehicle and pet detection in email report from Sentry does exist but those emails at the end of the night are useless to me and clogging up my emails. I use Bi to get alerts of something happening in real time...

It would be nice if the frame that is sent to Sentry has the blacked out area blacked out. I have cameras that face the street but motion detection is only for when they enter the property, But like you with people walking down the street if a shadow triggers a motion on the property now Sentry...

This has been suggested many times, and their solution was to build a web interface on their website to do this. I think they are a bit disconnected from BI to keep all this in one place. BI doesn't even currently store or mark the frames sent to Sentry. I'm having a hard time adding a still...

Has to be a bullet. LOL

The problem is much deeper. Sentry detects cars, people and pets. Sentry identify's and labels each differently in a nightly email. But Blueiris doesn't get any of that info. I believe that BI and Sentry could work well together if they were under the same roof or same company. Right now seems...

That is a Micky solution that would work but I have 10 cameras and that also would put unwanted load on the system adding 10 more cameras into BI.

Nope, Biggest problem is BlueIris is not giving us enough control with sentry. I would be nice to have more then one alert option. So we could trigger based off BI motion detection or Sentry. Or even more options. But currently and has been for some time that you cant do that. Once sentry is...

A portal of all our pictures is not necessary when BI has it's own storage for this. Why not let us do this on our end local vs. building a portal we have to log into.

Any update on this?

Is there not yet a way to have every frame sent to you saved in BI? Having to email you to see what frame I sent you (actually BI sent) is really a** backwards. You do know this will help us adjust settings on our side, cause less useless frames sent to your severs, improve overall accuracy...