Search results

One of my cameras captured the sound of the small earthquake we had Friday morning.

If you have to install the cameras above the floodlights, the lights themselves must be in a black housing. A white housing will reflect glare back to the camera and wash out the image.

In the past, I was able to scroll through motion alerts backwards by pressing the rewind key once. That would take me to the previous motion alert and start playing it. However, pressing the rewind key once only goes back to the beginning of the motion alert I was already viewing. I want it to...

I am using an older (2015) TP-Link POE Switch Model TL-SG1008PE with the latest version of Blue Iris and several versions of nine Amcrest cameras. However, about once a week, Blue Iris reports a lost signal on the newer Amcrest IP8M-T2599EW Camera. This is remedied by unplugging and plugging the...

I got Blue Iris to work with my EZVIZ doorbell camera including the audio. You could try the different audio formats in the menu, but "RTSP alternate AAC decoder" worked for my doorbell camera.

I am going to be installing the DB1C on overlapping shingles (no choice in the matter). Does the package come with a wedge mount, or do I need to use plastic spacers for the lower screws?

Telling the court that you had video evidence of them siphoning your electricity but you decided to shoot them anyway is not a good idea because they didn't appear to be a threat. I would leave out the part that you had video evidence and state that you caught them by surprise. All...

Looks like Geddy Lee in drag.

This is a little late, but clear plastic sheets will not reflect the flare. The area covered by the sheets will appear dark when the IR hits it. You can use thumbtacks to attach the sheets to make it easier to move or remove them.

A strong smelling petroleum jelly (Vicks Vaporub) works best, but it is messy.

I have tried everything to stop the spider webs without turning off the IR lights or nighttime alerts. Switching to turret cameras helps a little, but the spiders will still use the camera housing to form their webs across the lens and IR light. I have tried a peppermint oil/water/soap...

Three years ago, I needed to install four outside cameras under my eaves. I went into the attic, looked around, and I decided that I would be better off hiring a professional to run the cables. $1,200 later, I was glad I did because he needed to use an endoscope camera to determine how to get...

I have four of these used drives, and I am asking $300 for all four. I would rather sell them as a set of four and not separately. They are specifically made for a 24/7 NAS environment. They are not recommended for use as a regular hard drive for your computer. I am pulling them from my NAS...

Can I wire the CAT cable directly into this 8 port Gigabit POE switch? https://www.amazon.com/gp/product/B00E6LID0S/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Or, do I need to use the pigtail injector supplied and plug it into the switch and separate power outlet?

I used this thicker direct burial cable in my attic without conduits: http://a.co/caYdLYj Almost every attic will house mice, but I have had no problems with this cable yet.

This works very well for about 2 months, and then you have to reapply. I got it from Amazon: http://a.co/6Kw30ZI

Just a few days. I will see if compressed air forced through the side will dislodge it.

Hello, I have several Amcrest bullet cameras. I had no problem with i/r reflections until now. I now see a reflection on the top right of one of my camera views. I have highlighted the problems in my pictures below. Could it be possible that an i/r light bulb shifted into the field of view...

When in doubt, let the professionals do it. Find a good surveillance camera installer on Yelp or Angie's List and give them a call to see if they could help you. It won't cost anything to call, and you can decide if you want to spend the money for them to make house calls. I have a decent...

It depends on where and what you need to record. I have outdoor cameras, and I could never get BI's motion detection to stop its many false alerts with every cloud-sun-cloud transitions, the wind moving tree branches, and shadows. I went with Sighthound for its superior motion detection...

OK, thanks. Should I also change from CBR to VBR?

I have five Amcrest IP4M-1025E (rebranded Dahua DH-IPC-HFW44A1SN) cameras running on my Moca 2 network. CPU power is not a problem, as BI is installed on a I7-7700 computer. They are all running at 20 FPS and 10240 Kb/S. What can I lower them to and still maintain good quality?

My files are about 108 gigs per camera per day running at 20 FPS. The cameras are constantly on with trigger alerts. I want to reduce the FPS to 15 to reduce the file sizes. Do I reduce it in the Camera Properties - Video, or is it better to go directly to the camera's configuration page and...