Search results

Sorry for the delay, the dimensions for the foam ring you need are 14mm inside diameter x 24mm Outside Diameter x 10mm thick. As I said it has a notch cutout for the Day night sensor which is approx 5mm diameter. Hope this helps.

The foam ring is just friction fit after the lens has been focused and glued. It has a notch out of it for the Day/Night sensor. It would be easy to make one if you cant get one elsewhere. I can get you the measurements later if you like?

Does this mean that its monitoring for new writes? All of my cams have had the Mtd hack for a while. Am I in danger of bricking the camera if I try to update any of my cameras?

This is some great work. Thank you @montecrypto ! Ive noticed that you have been posting some repacked firmware with SSH re-enabled. Just wondering if you've modified the tool to do that and if so do you plan on posting the new tool? I have several R0 series cameras that I'd like to...

Rapidly changing video quality benefits from having more frequent i-frames, also if you have any transmission errors or packet loss you have to wait up to 3 seconds for a garbled image to refresh with a new i-frame. If bandwidth is not an issue, I would suggest 1 keyframe per second. Storage...

I would lower your i-frame interval to 20 so that you are getting 1 iframe per second as opposed to 1 every 3 seconds.

What do you mean by "You can still load versions of the firmware using TFTP but no success."?

I believe it is 5.3.0 but I would suggest you look at 5.2.5 as it seems to have less issues than 5.3.0. Several awesome members of this forum have made a custom 5.2.5 with 4 x smart events instead of just one. Have a look in the sticky thread.

It definitely seems to me that it has something to do with the change of passwords. Im still a little confused. Are you saying that the cameras work properly after you reboot them and you can then see them in IVMS?

I believe that you have to activate the camera and enter an admin password before you proceed. Either that or try 123456789abc

Hi, Im not quite sure what your issue is. If you could perhaps provide some more information about your situation someone may be able to help you. I see you're using a DS-2CD2032. What is the firmware running on the camera? Also are you using this camera with an NVR? You say that it...

***before doing any of this, I would read the forum topics and familiarize myself in the MTD hack if I were you**** If I were you, I would have a look at your mtd5block and mtd6block files. To do this you will need to tftp your chosen firmware to the camera, and when it is complete DO NOT...

The firmware for the WIFI and Non WIFI cameras is the same. The wireless settings are present if the wireless module is present and presumably working correctly. As klasipca said, I would go back to the seller and get a replacement. unless youre dead set on using this camera wirelessly I would...

That camera comes with Activation. You have to create a Strong Password in SADP, or on the initial login page before you can use it. What firmware are you running on the camera?

Im using the 5.2.5 firmware that has been modded for 4 line crossing detection. It could very well be a firmware thing.

Welcome to the forum! Just a couple of points: You have a long driveway so I would make a decision about what is important to you to see which will determine what your field of view is and what lens you want to use with your camera. Have a look at some of the comparisons for different field...

In Advanced Configuration > Network > Email I have Sender, Senders address and SMTP server and port configured. I also have an Interval of 2s and Attached Image is checked off. *This is the important one for attachments* Receiver and Receivers Address are also configured. In Advanced...

It does in fact work to attach a picture as an attachment for Line Crossing. I have it set up and it works well.

Simple stuff first... Have you checked your spam folder? Are you using your own SMTP server or your ISP's?

Internet Explorer should work once you enable the plugin. Chrome will not work right now. Are you using 32 or 64 bit IE?

I haven't tried it but its possible that you could try to use a crossover network cable and plug the camera into the LAN port but you would still have to power the camera separately using a 12V power supply.

Yes, the BBWR are true Western Region cameras. As a side note, you may still have an issue with warranty unless your aliexpress seller is an authorized re seller of Hikvision products as Hikvision only supports products sold through the correct authorized channels.

What version of the firmware does SADP report that the Camera is running? Does it report something about Min System?

Here is the Camera: http://huntcctv.com/product/hnc312-td/ It is a re-branded Hikvision. Its not necessarily a "counterfeit" if it is an unbranded or re-branded Hikvision as they are a HUGE manufacturer and produce cameras for many other companies as well. Given the specs, I'd say its a...

I have ordered a bunch of stuff from AliExpress and so far the only issue I had was resolved to my satisfaction and was a learning experience. I have bought cameras and cables and ir illuminators a mini computer and memory. The only issue I had was that the memory I bought was counterfeit. I...

Given your settings, I would change your I Frame Interval to 30 which will give you one Key Frame per second and reduce the possibility of poor images in the case of dropped or corrupt packets. Also I would switch to Variable Bit Rate as it is more efficient than Constant Bit Rate.

I have several 2532s and I am happy with them. I agree that the IR is not as bright as the domes or turrets etc, but for me the size was a better option. I have a 2.8 on my garage mounted under the soffit but I have a larger overhang which comes down about 6 inches. Even still I get good...

They are great illuminators, I have used them before. One thing to pay attention to is your environment. The video has some nice high powered illuminators that work well at a good distance but with that kind of power if you had objects as close as 10m away you might get alot of reflection off...

YAY! Unbricked. I just kind of reversed my steps and figured the breakdown was where I applied the MTD hack after it came up all in chinese. I had not done the date modification as I didnt recall having to do it before so I figured if I changed the mtd5 and 6 back to region 1 and applied the...

To clarify: - The camera WAS region changed through the MTD Hack as I did it myself changing from China 02 to English 01. - I tried to replace just the davinci.tar.gz but that didn't work so applied the 4 Region ROI firmware for CN cameras. That worked but all in Chinese. - I re-applied the...