led

  1. A

    Dahua camera LED only has flash/strobe setting, how can i make the LED stay on with a motion event? **SOLVED**

    Hello everyone, i have followed with hundreds of these threads and loved the knowledge you all have so here is my question.. Just purchased a Dahua 2MP active deterrent IPC camera to add to the front door, (Model IPC-HDW5241H-AS-PV) I specifically chose this model as when i walked in the...
    • AymBro
    • Thread
    • dahua ivs led motion solid strobe light wizense
    • Replies: 14
    • Forum: IP Cameras
  2. C

    Hikvision DS-7608NI-I2/8P blinking green power light/blinking red LED on motherboard.

    Hello fellow security camera techies. I own one Hikvision DS-7608NI-I2/8P NVR which works great. I purchased a 2nd Hikvision DS-7608NI-I2/8P used. However the 2nd one won't boot up. Upon plugging it in and flipping on the back switch, the front panel "power" LED blinks. Upon opening the...
  3. LoneEdge

    DS-2CD2386G2-ISU LED always on at night?

    Hello I purchased a new camera 8MP DS-2CD2386G2-ISU I was wondering if its possible to keep the LED light on during the night instead of using IR. I have a DS-2CD2347Gl-LU and the LED light stays on all night and turns off in the morning is there anyway to do this with my other camera...
    • LoneEdge
    • Thread
    • ds-2cd2386g2-isu hikvision led
    • Replies: 11
    • Forum: Hikvision
  4. fenderman

    POE+ Unifi Network-Managed LED Panel and Dimmer Switch

    140 for the light 50 for the dimmer. The price is not bad. Perfect for additional garage, basement, shed, attic lighting... UniFi LED | Dimmer Switch
  5. Prinler

    Solar Led Lights

    Hey guys, I was wanted to pop in here and share my experience with some new led lights I just picked up off Amzn. I recently installed 2x 2mp Dahua Starlight cameras over my driveway to watch my cars. In the pitch black they didnt show a ton of detail even with the IR lights provided in the IP...
    • Prinler
    • Thread
    • led light lights motion motion detection solar
    • Replies: 5
    • Forum: Accessories
  6. R

    Strobe/LED for Alarm Output

    First post... I have a few Hikvision cameras that have an alarm output. I would like to attach a strobe or LED that would simulate a camera flash. Does anyone know an easy way to do this? My issue is that when the alarm output is activated, the strobe or LED will stay illuminated until motion...
    • rschandl
    • Thread
    • alarm i/o. alarm output arduino hikvision led
    • Replies: 8
    • Forum: Accessories
  7. M

    Auto IR won't engage?

    Hi, Since the last update (4.2.60 x64) the IR button on the control panel only has on or off. Used to have an "AUTO" setting. I'd rather not leave the IR LEDs on all day if I don't have too. Any ideas? (Other than restoring a mirror image from a week ago prior to the last update...) Thanks! Micro
  8. nzipcamera

    IR LED light / Illuminator for outdoor use

    Hi, Does anyone have a recommendation for a good quality, high power outdoor IR LED light? It needs to be bright (maybe 50 - 100w) and have a wide field of view (around 70 degrees) and be the 850nm wave length. Seems to be a lots of cheap and nasty looking ones on Ali, Ebay and Amazon it's...
    • nzipcamera
    • Thread
    • illuminator ir led light led lighting outdoor
    • Replies: 9
    • Forum: Accessories
  9. B

    DS-2CD2432F-IW Nightvision/IR not working?

    I just bought one of these cameras and am having difficulty getting any usable image out of night mode with IR. In a dark room, the image is almost completely black and no real detail is visible unless it is almost within a foot of the camera lens. I’ve adjusted settings to match exactly those...
  10. N

    Low Cost Illuminators

    I've noticed there was a lot of people buying the CMVision illuminators so I purchase the IR3, a 3 LED illuminator on Amazon for $15,49. It's advertised to have a lighting angle of 60-80 degrees and 50-100' range. So first to show you the problem I had and why I need an illuminator in the...
Top Bottom